On Thu, 13 Nov 2014, Benson Leung wrote: > usbhid->intf->needs_remote_wakeup is set when a device is > opened, and is cleared when a device is closed. > > When a usbhid device that does not support remote wake > ( i.e. !device_can_wakeup() ) is closed, we fail out of > autosuspend_check() because the autosuspend check is called > before the flag is cleared as a result of usb_kill_urb(usbhid->urbin); > > The result is that a device that may otherwise autosuspend will > fail to enter suspend again after all handles to it are closed. > > In usbhid_open, usb_autopm_get_interface is called > before setting the needs_remote_wakeup flag, and > usb_autopm_put_interface is called after hid_start_in. > > However, when the device is closed in usbhid_close, the same > protection isn't there when clearing needs_remote_wakeup. This will > add that to usbhid_close as well as usbhid_stop.
usbhid_stop probably doesn't need it. And it should be possible to fix usbhid_close more easily just by interchanging the two lines: - usb_kill_urb(usbhid->urbin); usbhid->intf->needs_remote_wakeup = 0; + usb_kill_urb(usbhid->urbin); Have you tried this? Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html