On Fri, Jan 09, 2015 at 06:17:50PM +0800, Chen-Yu Tsai wrote: > The core temperature sensor now supports thermal zones. Add a thermal > zone mapping for the cpus with passive cooling (cpufreq throttling). > > Signed-off-by: Chen-Yu Tsai <w...@csie.org>
This patch looks fine to me: Acked-by: Eduardo Valentin <edubez...@gmail.com> > --- > > changes since v1: > > - Use thermal dt bindings macros in cooling-device > > --- > arch/arm/boot/dts/sun7i-a20.dtsi | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi > b/arch/arm/boot/dts/sun7i-a20.dtsi > index c2e964939991..61780b144745 100644 > --- a/arch/arm/boot/dts/sun7i-a20.dtsi > +++ b/arch/arm/boot/dts/sun7i-a20.dtsi > @@ -50,6 +50,7 @@ > #include "skeleton.dtsi" > > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/thermal/thermal.h> > > #include <dt-bindings/dma/sun4i-a10.h> > #include <dt-bindings/pinctrl/sun4i-a10.h> > @@ -116,6 +117,38 @@ > }; > }; > > + thermal-zones { > + cpu_thermal { > + /* milliseconds */ > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&rtp>; > + > + cooling-maps { > + map0 { > + trip = <&cpu_alert0>; > + cooling-device = <&cpu0 > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + > + trips { > + cpu_alert0: cpu_alert0 { > + /* milliCelsius */ > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu_crit: cpu_crit { > + /* milliCelsius */ > + temperature = <100000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > memory { > reg = <0x40000000 0x80000000>; > }; > -- > 2.1.4 >
signature.asc
Description: Digital signature