Without this, my "Gasia Co.,Ltd PS(R) Gamepad" would not send
any events. Now everything works including the leds.
Based on work by Andrew Haines and Antonio Ospite.
cc: Antonio Ospite <a...@ao2.it>
cc: Andrew Haines <andrewd...@aol.com>
Signed-off-by: Lauri Kasanen <c...@gmx.com>
---
drivers/hid/hid-sony.c | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
Antonio's original approach was not enough; it enabled the events,
but only for a few seconds, then the controller timed out and sent
no more. Andrew's did more than was necessary. This is a combination
of the two, against Linus' git.
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 31e9d25..de93386 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -36,6 +36,7 @@
#include <linux/list.h>
#include <linux/idr.h>
#include <linux/input/mt.h>
+#include <linux/usb/input.h>
#include "hid-ids.h"
@@ -1130,8 +1131,12 @@ static void sony_input_configured(struct hid_device
*hdev,
*/
static int sixaxis_set_operational_usb(struct hid_device *hdev)
{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ struct usb_device *dev = interface_to_usbdev(intf);
int ret;
- char *buf = kmalloc(18, GFP_KERNEL);
+ char *buf = kmalloc(65, GFP_KERNEL);
+ unsigned char buf2[] = { 0x00 };
+ int transfered;
if (!buf)
return -ENOMEM;
@@ -1140,7 +1145,24 @@ static int sixaxis_set_operational_usb(struct hid_device
*hdev)
HID_REQ_GET_REPORT);
if (ret < 0)
- hid_err(hdev, "can't set operational mode\n");
+ hid_err(hdev, "can't set operational mode on the control EP\n");
+
+ /*
+ * Some compatible controllers like the Speedlink Strike FX and
+ * Gasia need another query plus an USB interrupt to get operational.
+ */
+ ret = hid_hw_raw_request(hdev, 0xf5, buf, 64, HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
+
+ if (ret < 0)
+ hid_err(hdev, "can't set operational mode on the interrupt
EP\n");
+
+ ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x02),
+ buf2, sizeof(buf2),
+ &transfered, USB_CTRL_SET_TIMEOUT);
+
+ if (ret < 0)
+ hid_err(hdev, "can't set operational mode on the interrupt
EP\n");
kfree(buf);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
