This adds a key input driver for the keys found on the h3xxx
iPAQ series.

Based on a driver from handhelds.org 2.6.21 kernel, written
by Alessandro GARDICH.

Signed-off-by: Alessandro GARDICH <grem...@gremlin.it>
Signed-off-by: Dmitry Artamonow <mad_s...@inbox.ru>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
ChangeLog v1->v2:
- Improve KConfig help text for module building
- Delete useless <linux/version.h> include
- Don't clamp key up/down to bool, core will handle it
- Staticize keycodes
- Split out open/close operations
- Use devm_input_allocate_device()
- Copy keycodes to state container struct
- Set keycodesize and keycodemax
- Use SIMPLE_DEV_PM_OPS()
---
 drivers/input/keyboard/Kconfig           |  10 ++
 drivers/input/keyboard/Makefile          |   1 +
 drivers/input/keyboard/ipaq-micro-keys.c | 166 +++++++++++++++++++++++++++++++
 3 files changed, 177 insertions(+)
 create mode 100644 drivers/input/keyboard/ipaq-micro-keys.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a89ba7cb96f1..35cf866617d2 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -588,6 +588,16 @@ config KEYBOARD_DAVINCI
          To compile this driver as a module, choose M here: the
          module will be called davinci_keyscan.
 
+config KEYBOARD_IPAQ_MICRO
+       tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
+       depends on MFD_IPAQ_MICRO
+       help
+         Say Y to enable support for the buttons attached to
+         Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+         To compile this driver as a module, choose M here: the
+         module will be called ipaq-micro-keys.
+
 config KEYBOARD_OMAP
        tristate "TI OMAP keypad support"
        depends on ARCH_OMAP1
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 470767884bd8..a171b7119674 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_KEYBOARD_TCA6416)                += 
tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_TCA8418)         += tca8418_keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)             += hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)         += hilkbd.o
+obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)      += ipaq-micro-keys.o
 obj-$(CONFIG_KEYBOARD_IMX)             += imx_keypad.o
 obj-$(CONFIG_KEYBOARD_HP6XX)           += jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)           += jornada720_kbd.o
diff --git a/drivers/input/keyboard/ipaq-micro-keys.c 
b/drivers/input/keyboard/ipaq-micro-keys.c
new file mode 100644
index 000000000000..4226354f25e5
--- /dev/null
+++ b/drivers/input/keyboard/ipaq-micro-keys.c
@@ -0,0 +1,166 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3600 atmel micro companion support, key subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <grem...@gremlin.it>
+ * Author : Linus Walleij <linus.wall...@linaro.org>
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct ipaq_micro_keys {
+       struct ipaq_micro *micro;
+       struct input_dev *input;
+       u16 *codes;
+};
+
+static const u16 micro_keycodes[] = {
+       KEY_RECORD,             /* 1:  Record button                    */
+       KEY_CALENDAR,           /* 2:  Calendar                         */
+       KEY_ADDRESSBOOK,        /* 3:  Contacts (looks like Outlook)    */
+       KEY_MAIL,               /* 4:  Envelope (Q on older iPAQs)      */
+       KEY_HOMEPAGE,           /* 5:  Start (looks like swoopy arrow)  */
+       KEY_UP,                 /* 6:  Up                               */
+       KEY_RIGHT,              /* 7:  Right                            */
+       KEY_LEFT,               /* 8:  Left                             */
+       KEY_DOWN,               /* 9:  Down                             */
+};
+
+static void micro_key_receive(void *data, int len, unsigned char *msg)
+{
+       struct ipaq_micro_keys *keys = data;
+       int key, down;
+
+       down = 0x80 & msg[0];
+       key  = 0x7f & msg[0];
+
+       if (key < ARRAY_SIZE(micro_keycodes)) {
+               input_report_key(keys->input, keys->codes[key], down);
+               input_sync(keys->input);
+       }
+}
+
+static int micro_key_open(struct input_dev *input)
+{
+       struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+       spin_lock(&keys->micro->lock);
+       keys->micro->key = micro_key_receive;
+       keys->micro->key_data = keys;
+       spin_unlock(&keys->micro->lock);
+
+       return 0;
+}
+
+static void micro_key_close(struct input_dev *input)
+{
+       struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+       spin_lock(&keys->micro->lock);
+       keys->micro->key = NULL;
+       keys->micro->key_data = NULL;
+       spin_unlock(&keys->micro->lock);
+}
+
+static int micro_key_probe(struct platform_device *pdev)
+{
+       struct ipaq_micro_keys *keys;
+       int ret;
+       int i;
+
+       keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+       if (!keys)
+               return -ENOMEM;
+       keys->input = devm_input_allocate_device(&pdev->dev);
+       if (!keys->input)
+               return -ENOMEM;
+
+       keys->input->keycodesize = sizeof(micro_keycodes[0]);
+       keys->input->keycodemax = ARRAY_SIZE(micro_keycodes);
+       keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes,
+                          keys->input->keycodesize * keys->input->keycodemax,
+                          GFP_KERNEL);
+       keys->input->keycode = keys->codes;
+
+       keys->micro = dev_get_drvdata(pdev->dev.parent);
+       keys->input->evbit[0] = BIT(EV_KEY);
+       set_bit(EV_KEY, keys->input->evbit);
+       for (i = 0; i < ARRAY_SIZE(micro_keycodes); i++) {
+               set_bit(micro_keycodes[i], keys->input->keybit);
+       }
+       keys->input->name = "h3600 micro keys";
+       keys->input->open = micro_key_open;
+       keys->input->close = micro_key_close;
+       input_set_drvdata(keys->input, keys);
+
+       ret = input_register_device(keys->input);
+       if (ret)
+               return ret;
+
+       platform_set_drvdata(pdev, keys);
+       return 0;
+}
+
+static int micro_key_remove(struct platform_device *pdev)
+{
+       struct ipaq_micro_keys *keys = platform_get_drvdata(pdev);
+
+       input_unregister_device(keys->input);
+
+       return 0;
+}
+
+static int __maybe_unused micro_key_suspend(struct device *dev)
+{
+       struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+
+       spin_lock(&keys->micro->lock);
+       keys->micro->key = NULL;
+       keys->micro->key_data = NULL;
+       spin_unlock(&keys->micro->lock);
+
+       return 0;
+}
+
+static int __maybe_unused micro_key_resume(struct device *dev)
+{
+       struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+
+       spin_lock(&keys->micro->lock);
+       keys->micro->key = micro_key_receive;
+       keys->micro->key_data = keys;
+       spin_unlock(&keys->micro->lock);
+
+       return 0;
+}
+
+SIMPLE_DEV_PM_OPS(micro_key_dev_pm_ops, micro_key_suspend, micro_key_resume);
+
+struct platform_driver micro_key_device_driver = {
+       .driver = {
+               .name    = "ipaq-micro-keys",
+               .pm     = &micro_key_dev_pm_ops,
+       },
+       .probe   = micro_key_probe,
+       .remove  = micro_key_remove,
+};
+module_platform_driver(micro_key_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro keys");
+MODULE_ALIAS("platform:ipaq-micro-keys");
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to