On Thu, 5 Mar 2015 20:32:41 +0300 Aleksei Mamlin <mamli...@gmail.com> wrote:
> This patch adds device tree support and binding information for Goodix > GT9xx series touchscreen controller. > It also adds support for 5-finger chips, like GT911 and GT912, which > can be found on ARM tablets, like Wexler TAB7200 and MSI Primo73. > > Changes since v2: > * Split to two patches: > The first one for use max number of touches from device config. > The second one adds device tree support. > > Changes since v1: > * Merge patches into single patch. > * Use max touch number from config instead of hardcoding. > * Update description in Kconfig. > Hi Aleksei, patch history usually goes after the '---' marker, as an annotation, not in the the commit message itself. > Datasheets can be found here: > https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKNlktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharing > > Signed-off-by: Aleksei Mamlin <mamli...@gmail.com> > --- > .../bindings/input/touchscreen/goodix.txt | 29 > ++++++++++++++++++++++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/input/touchscreen/Kconfig | 5 ++-- > drivers/input/touchscreen/goodix.c | 21 +++++++++++++++- > 4 files changed, 53 insertions(+), 3 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/input/touchscreen/goodix.txt > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > new file mode 100644 > index 0000000..8ba98ee > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > @@ -0,0 +1,29 @@ > +Device tree bindings for Goodix GT9xx series touchscreen controller > + > +Required properties: > + > + - compatible : Should be "goodix,gt911" > + or "goodix,gt9110" > + or "goodix,gt912" > + or "goodix,gt927" > + or "goodix,gt9271" > + or "goodix,gt928" > + or "goodix,gt967" > + - reg : I2C address of the chip. Should be 0x5d or > 0x14 > + - interrupt-parent : Interrupt controller to which the chip is connected > + - interrupts : Interrupt to which the chip is connected These touch-screens supports two lines, an interrupt line and a reset line; and they may be both bound to gpio pins, not necessarily to system interrupts. The fields you specified above should be enough to cover at least the case of a gpio driven interrupt line, I just wanted to highlight the situation. A gpio-reset property can be added in future when the driver will actually make use of it. JFTR, in the Android drivers the reset operation is sometimes called a "guitar reset", the two lines are set and unset following the sequence shown in the datasheet in order to change the device status (interrupted, operational), on x86 this function can be transparently performed by ACPI, on my device it is in fact done when calling the PS0 method. What is the situation on your ARM devices? Are you going to make use of the reset line explicitly at some point? I am just curious. > + > +Example: > + > + i2c@00000000 { > + /* ... */ > + > + gt928@5d { > + compatible = "goodix,gt928"; > + reg = <0x5d>; > + interrupt-parent = <&gpio>; > + interrupts = <0 0>; > + }; > + > + /* ... */ > + }; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt > b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 389ca13..ab6852d 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -76,6 +76,7 @@ geniatech Geniatech, Inc. > giantplus Giantplus Technology Co., Ltd. > globalscale Globalscale Technologies, Inc. > gmt Global Mixed-mode Technology, Inc. > +goodix Shenzhen Huiding Technology Co., Ltd. > google Google, Inc. > gumstix Gumstix, Inc. > gw Gateworks Corporation > diff --git a/drivers/input/touchscreen/Kconfig > b/drivers/input/touchscreen/Kconfig > index 5891752..2adf724 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -297,11 +297,12 @@ config TOUCHSCREEN_FUJITSU > > config TOUCHSCREEN_GOODIX > tristate "Goodix I2C touchscreen" > - depends on I2C && ACPI > + depends on I2C > help > Say Y here if you have the Goodix touchscreen (such as one > installed in Onda v975w tablets) connected to your > - system. > + system. It also supports 5-finger chip models, which can be > + found on ARM tablets, like Wexler TAB7200 and MSI Primo73. > > If unsure, say N. > > diff --git a/drivers/input/touchscreen/goodix.c > b/drivers/input/touchscreen/goodix.c > index a3e2057..efba6a3 100644 > --- a/drivers/input/touchscreen/goodix.c > +++ b/drivers/input/touchscreen/goodix.c > @@ -23,6 +23,8 @@ > #include <linux/irq.h> > #include <linux/interrupt.h> > #include <linux/slab.h> > +#include <linux/acpi.h> > +#include <linux/of.h> > #include <asm/unaligned.h> > > struct goodix_ts_data { > @@ -375,11 +377,27 @@ static const struct i2c_device_id goodix_ts_id[] = { > { } > }; > > +#ifdef CONFIG_ACPI > static const struct acpi_device_id goodix_acpi_match[] = { > { "GDIX1001", 0 }, > { } > }; > MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); > +#endif > + > +#ifdef CONFIG_OF > +static const struct of_device_id goodix_of_match[] = { > + { .compatible = "goodix,gt911" }, > + { .compatible = "goodix,gt9110" }, > + { .compatible = "goodix,gt912" }, > + { .compatible = "goodix,gt927" }, > + { .compatible = "goodix,gt9271" }, > + { .compatible = "goodix,gt928" }, > + { .compatible = "goodix,gt967" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, goodix_of_match); > +#endif > > static struct i2c_driver goodix_ts_driver = { > .probe = goodix_ts_probe, > @@ -387,7 +405,8 @@ static struct i2c_driver goodix_ts_driver = { > .driver = { > .name = "Goodix-TS", > .owner = THIS_MODULE, > - .acpi_match_table = goodix_acpi_match, > + .acpi_match_table = ACPI_PTR(goodix_acpi_match), > + .of_match_table = of_match_ptr(goodix_of_match), > }, > }; > module_i2c_driver(goodix_ts_driver); > -- > 2.0.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Antonio Ospite http://ao2.it A: Because it messes up the order in which people normally read text. See http://en.wikipedia.org/wiki/Posting_style Q: Why is top-posting such a bad thing? -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
