> Focaltech touchpads report finger width in packet[5] of absolute packet.
> Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0.
> 0xff is reported, when a large contact area is detected.
> This can be handled in userspace.
>
> Signed-off-by: Dmitry Tunin <hanipouspi...@gmail.com>
> ---
> drivers/input/mouse/focaltech.c | 53
> +++++++++++++++++++++++++----------------
> 1 file changed, 32 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c
> index 23d2594..1ef9d2b 100644
> --- a/drivers/input/mouse/focaltech.c
> +++ b/drivers/input/mouse/focaltech.c
> @@ -55,8 +55,6 @@ static void focaltech_reset(struct psmouse *psmouse)
> psmouse_reset(psmouse);
> }
>
> -#ifdef CONFIG_MOUSE_PS2_FOCALTECH
> -
> /*
> * Packet types - the numbers are not consecutive, so we might be missing
> * something here.
> @@ -105,6 +103,16 @@ struct focaltech_hw_state {
>
> /* True if the clickpad has been pressed. */
> bool pressed;
> +
> + /*
> + * Finger width 0-7 and 15 for 'latching'
> + * 15 value stays until the finger is released
> + * Width is reported only when 1 finger is active
> + */
> + unsigned int width;
> +
> + /* Finger count */
> + unsigned int count;
> };
>
> struct focaltech_data {
> @@ -118,7 +126,7 @@ static void focaltech_report_state(struct psmouse
> *psmouse)
> struct focaltech_hw_state *state = &priv->state;
> struct input_dev *dev = psmouse->dev;
> int i;
> -
> +
> for (i = 0; i < FOC_MAX_FINGERS; i++) {
> struct focaltech_finger_state *finger = &state->fingers[i];
> bool active = finger->active && finger->valid;
> @@ -126,21 +134,23 @@ static void focaltech_report_state(struct psmouse
> *psmouse)
> input_mt_slot(dev, i);
> input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
> if (active) {
> - unsigned int clamped_x, clamped_y;
> + int clamped_x, clamped_y;
> /*
> * The touchpad might report invalid data, so we clamp
> * the resulting values so that we do not confuse
> * userspace.
> */
> - clamped_x = clamp(finger->x, 0U, priv->x_max);
> - clamped_y = clamp(finger->y, 0U, priv->y_max);
> + clamped_x = clamp((int)finger->x, 0, (int)priv->x_max);
> + clamped_y = clamp((int)finger->y, 0, (int)priv->y_max);
> input_report_abs(dev, ABS_MT_POSITION_X, clamped_x);
> input_report_abs(dev, ABS_MT_POSITION_Y,
> priv->y_max - clamped_y);
> + if (state->count == 1)
> + input_report_abs(dev, ABS_TOOL_WIDTH,
> state->width);
> }
> }
> - input_mt_report_pointer_emulation(dev, true);
> -
> + input_mt_report_finger_count(dev, state->count);
> + input_mt_report_pointer_emulation(dev, false);
> input_report_key(psmouse->dev, BTN_LEFT, state->pressed);
> input_sync(psmouse->dev);
> }
> @@ -152,13 +162,17 @@ static void focaltech_process_touch_packet(struct
> psmouse *psmouse,
> struct focaltech_hw_state *state = &priv->state;
> unsigned char fingers = packet[1];
> int i;
> + int count = 0;
>
> state->pressed = (packet[0] >> 4) & 1;
>
> /* the second byte contains a bitmap of all fingers touching the pad */
> for (i = 0; i < FOC_MAX_FINGERS; i++) {
> - state->fingers[i].active = fingers & 0x1;
> - if (!state->fingers[i].active) {
> +
> + if (fingers & 0x1) {
> + state->fingers[i].active = true;
> + count++;
> + } else {
> /*
> * Even when the finger becomes active again, we still
> * will have to wait for the first valid position.
> @@ -167,6 +181,8 @@ static void focaltech_process_touch_packet(struct psmouse
> *psmouse,
> }
> fingers >>= 1;
> }
> + state->width = packet[5] >> 4;
> + state->count = count;
> }
>
> static void focaltech_process_abs_packet(struct psmouse *psmouse,
> @@ -187,6 +203,7 @@ static void focaltech_process_abs_packet(struct psmouse
> *psmouse,
>
> state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2];
> state->fingers[finger].y = (packet[3] << 8) | packet[4];
> + state->width = packet[5] >> 4;
> state->fingers[finger].valid = true;
> }
>
> @@ -331,6 +348,7 @@ static void focaltech_set_input_params(struct psmouse
> *psmouse)
> __set_bit(EV_ABS, dev->evbit);
> input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
> input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
> + input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
> input_mt_init_slots(dev, 5, INPUT_MT_POINTER);
> __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
> }
> @@ -428,9 +446,8 @@ int focaltech_init(struct psmouse *psmouse)
> /* resync is not supported yet */
> psmouse->resync_time = 0;
> /*
> - * rate/resolution/scale changes are not supported yet, and
> - * the generic implementations of these functions seem to
> - * confuse some touchpads
> + * rate/resolution/scale changes are not supported yet, and the generic
> + * implementations of these functions seem to confuse some touchpads
> */
> psmouse->set_resolution = focaltech_set_resolution;
> psmouse->set_rate = focaltech_set_rate;
> @@ -444,13 +461,7 @@ fail:
> return error;
> }
>
> -#else /* CONFIG_MOUSE_PS2_FOCALTECH */
> -
> -int focaltech_init(struct psmouse *psmouse)
> +bool focaltech_supported(void)
> {
> - focaltech_reset(psmouse);
> -
> - return 0;
> + return true;
> }
> -
> -#endif /* CONFIG_MOUSE_PS2_FOCALTECH */
>
This is against a wrong three. Next must be OK.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
