From: Frank Li <[email protected]> snvs is MFP device. Change dts to use syscon to allocate register resource. snvs power off also switch to common syscon-poweroff
Signed-off-by: Frank Li <[email protected]> --- arch/arm/boot/dts/imx6qdl.dtsi | 19 +++++++++---------- arch/arm/boot/dts/imx6sl.dtsi | 19 +++++++++---------- arch/arm/boot/dts/imx6sx.dtsi | 17 ++++++++--------- arch/arm/boot/dts/vfxxx.dtsi | 9 +++------ 4 files changed, 29 insertions(+), 35 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 0482a66..4f3f5f4 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -686,22 +686,21 @@ fsl,anatop = <&anatop>; }; - snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; + snvs:snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; - snvs_rtc: snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, <0 20 IRQ_TYPE_LEVEL_HIGH>; }; - snvs_poweroff: snvs-poweroff@38 { - compatible = "fsl,sec-v4.0-poweroff"; - reg = <0x38 0x4>; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index a78e715..2de6d46 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -563,22 +563,21 @@ fsl,anatop = <&anatop>; }; - snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; + snvs:snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; - snvs_rtc: snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, <0 20 IRQ_TYPE_LEVEL_HIGH>; }; - snvs_poweroff: snvs-poweroff@38 { - compatible = "fsl,sec-v4.0-poweroff"; - reg = <0x38 0x4>; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 708175d..3cb3b5b 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -662,20 +662,19 @@ }; snvs: snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; - snvs_rtc: snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; }; - snvs_poweroff: snvs-poweroff@38 { - compatible = "fsl,sec-v4.0-poweroff"; - reg = <0x38 0x4>; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 4aa3351..fccfc01 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -404,14 +404,11 @@ }; snvs0: snvs@400a7000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x400a7000 0x2000>; + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x400a7000 0x2000>; - snvsrtc: snvs-rtc-lp@34 { + snvsrtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SNVS>; clock-names = "snvs-rtc"; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
