From: Pavel Rojtberg <[email protected]>

The pad_nr should be consistent after disconnecting/ reconnecting a
xbox360 controllers.
Use a bitmask to track connected pads - this way we can re-assign freed
up pad numbers.

Consider the following case:
1. pad A is connected and gets pad_nr = 0
2. pad B is connected and gets pad_nr = 1
3. pad A is disconnected
4. pad A is connected again

using the bitmask controller A now correctly gets pad_nr = 0 again.

Note: this sets a limit of 32 simultaneous connected xbox360
controllers. However this should be tolerable.

Signed-off-by: Pavel Rojtberg <[email protected]>
---
 drivers/input/joystick/xpad.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index a9ff4c2..e28a9c1 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -346,6 +346,8 @@ struct usb_xpad {
        struct work_struct work;        /* init/remove device from callback */
 };
 
+static unsigned long xpad_pad_seq;
+
 static int xpad_init_input(struct usb_xpad *xpad);
 static void xpad_deinit_input(struct usb_xpad *xpad);
 
@@ -940,6 +942,12 @@ static void xpad_send_led_command(struct usb_xpad *xpad, 
int command)
  */
 static void xpad_identify_controller(struct usb_xpad *xpad)
 {
+       if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W)
+               return;
+
+       xpad->pad_nr = find_first_zero_bit(&xpad_pad_seq, 32);
+       set_bit(xpad->pad_nr, &xpad_pad_seq);
+
        xpad_send_led_command(xpad, (xpad->pad_nr % 4) + 2);
 }
 
@@ -954,7 +962,6 @@ static void xpad_led_set(struct led_classdev *led_cdev,
 
 static int xpad_led_probe(struct usb_xpad *xpad)
 {
-       static atomic_t led_seq = ATOMIC_INIT(-1);
        struct xpad_led *led;
        struct led_classdev *led_cdev;
        int error;
@@ -966,8 +973,6 @@ static int xpad_led_probe(struct usb_xpad *xpad)
        if (!led)
                return -ENOMEM;
 
-       xpad->pad_nr = atomic_inc_return(&led_seq);
-
        snprintf(led->name, sizeof(led->name), "xpad%lu", xpad->pad_nr);
        led->xpad = xpad;
 
@@ -1119,6 +1124,8 @@ static int xpad_init_input(struct usb_xpad *xpad)
                        xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
        }
 
+       xpad_identify_controller(xpad);
+
        error = xpad_init_ff(xpad);
        if (error)
                goto fail_init_ff;
@@ -1131,8 +1138,6 @@ static int xpad_init_input(struct usb_xpad *xpad)
        if (error)
                goto fail_input_register;
 
-       xpad_identify_controller(xpad);
-
        return 0;
 
 fail_input_register:
@@ -1292,6 +1297,11 @@ static void xpad_deinit_input(struct usb_xpad *xpad)
 {
        xpad_led_disconnect(xpad);
        input_unregister_device(xpad->dev);
+
+       if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W)
+               return;
+
+       clear_bit(xpad->pad_nr, &xpad_pad_seq);
 }
 
 static void xpad_disconnect(struct usb_interface *intf)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to