This commit deprecates the 'half-period' property and introduces
a new property 'steps-per-period'. This property specifies the
number of steps (stable states) produced by the rotary encoder
for each GPIO period.
Such a property is required to accurately describe all kinds of
rotary-encoders devices.
Signed-off-by: Ezequiel Garcia <ezequ...@vanguardiasur.com.ar>
---
Documentation/devicetree/bindings/input/rotary-encoder.txt | 9 +++++++++
Documentation/input/rotary-encoder.txt | 8 ++++++--
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt
b/Documentation/devicetree/bindings/input/rotary-encoder.txt
index 331549593ed5..5715ad70d28e 100644
--- a/Documentation/devicetree/bindings/input/rotary-encoder.txt
+++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt
@@ -14,7 +14,16 @@ Optional properties:
device, hence no steps need to be passed.
- rotary-encoder,rollover: Automatic rollove when the rotary value becomes
greater than the specified steps or smaller than 0. For absolute axis only.
+- rotary-encoder,steps-per-period: Number of steps (stable states) per period.
+ The values have the following meaning:
+ 1: Full-period mode (default)
+ 2: Half-period mode
+ 4: Quarter-period mode
+
+Deprecated properties:
- rotary-encoder,half-period: Makes the driver work on half-period mode.
+ This property is deprecated. Instead, a 'steps-per-period ' value should
+ be used, such as "rotary-encoder,steps-per-period = <2>".
See Documentation/input/rotary-encoder.txt for more information.
diff --git a/Documentation/input/rotary-encoder.txt
b/Documentation/input/rotary-encoder.txt
index 5737e3590adb..00acf88e4064 100644
--- a/Documentation/input/rotary-encoder.txt
+++ b/Documentation/input/rotary-encoder.txt
@@ -9,8 +9,9 @@ peripherals with two wires. The outputs are phase-shifted by 90
degrees
and by triggering on falling and rising edges, the turn direction can
be determined.
-Some encoders have both outputs low in stable states, whereas others also have
-a stable state with both outputs high (half-period mode).
+Some encoders have both outputs low in stable states, others also have
+a stable state with both outputs high (half-period mode) and some have
+a stable state in all steps (quarter-period mode).
The phase diagram of these two outputs look like this:
@@ -32,6 +33,9 @@ The phase diagram of these two outputs look like this:
|<-->|
one step (half-period mode)
+ |<>|
+ one step (quarter-period mode)
+
For more information, please see
https://en.wikipedia.org/wiki/Rotary_encoder
--
2.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
