On Wed, Dec 2, 2015 at 8:22 PM, Peter Hutterer <[email protected]> wrote:
> These devices have a pen device and a touch device through the same serial
> protocol, split it up into two separate devices like we do for USB Wacom
> tablets too.
>
> Userspace already matches on the device name so we can't drop it completely.
> Compose the same basename based on capabilities and append the tool type,
> leading to a name like "Wacom Serial Penabled 2FG Touchscreen Pen".
>
> Note that this drops BTN_TOOL_FINGER, it is not needed once the tools
> are split out (and a touch device with BTN_TOOL_FINGER is interpreted
> as touchpad by most of userspace).
>
> Signed-off-by: Peter Hutterer <[email protected]>
> Acked-by: Benjamin Tissoires <[email protected]>
Applied all 5, thank you.
> ---
> Changes to v1:
> - don't leak open_count on error
>
> drivers/input/touchscreen/wacom_w8001.c | 167
> ++++++++++++++++++++++----------
> 1 file changed, 116 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/input/touchscreen/wacom_w8001.c
> b/drivers/input/touchscreen/wacom_w8001.c
> index de8f0e4..fe983e7 100644
> --- a/drivers/input/touchscreen/wacom_w8001.c
> +++ b/drivers/input/touchscreen/wacom_w8001.c
> @@ -80,7 +80,8 @@ struct w8001_touch_query {
> */
>
> struct w8001 {
> - struct input_dev *dev;
> + struct input_dev *pen_dev;
> + struct input_dev *touch_dev;
> struct serio *serio;
> struct completion cmd_done;
> int id;
> @@ -95,7 +96,10 @@ struct w8001 {
> u16 max_touch_y;
> u16 max_pen_x;
> u16 max_pen_y;
> - char name[64];
> + char pen_name[64];
> + char touch_name[64];
> + int open_count;
> + struct mutex mutex;
> };
>
> static void parse_pen_data(u8 *data, struct w8001_coord *coord)
> @@ -141,7 +145,7 @@ static void scale_touch_coordinates(struct w8001 *w8001,
>
> static void parse_multi_touch(struct w8001 *w8001)
> {
> - struct input_dev *dev = w8001->dev;
> + struct input_dev *dev = w8001->touch_dev;
> unsigned char *data = w8001->data;
> unsigned int x, y;
> int i;
> @@ -207,7 +211,7 @@ static void parse_touchquery(u8 *data, struct
> w8001_touch_query *query)
>
> static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
> {
> - struct input_dev *dev = w8001->dev;
> + struct input_dev *dev = w8001->pen_dev;
>
> /*
> * We have 1 bit for proximity (rdy) and 3 bits for tip, side,
> @@ -233,11 +237,6 @@ static void report_pen_events(struct w8001 *w8001,
> struct w8001_coord *coord)
> break;
>
> case BTN_TOOL_FINGER:
> - input_report_key(dev, BTN_TOUCH, 0);
> - input_report_key(dev, BTN_TOOL_FINGER, 0);
> - input_sync(dev);
> - /* fall through */
> -
> case KEY_RESERVED:
> w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
> break;
> @@ -261,7 +260,7 @@ static void report_pen_events(struct w8001 *w8001, struct
> w8001_coord *coord)
>
> static void report_single_touch(struct w8001 *w8001, struct w8001_coord
> *coord)
> {
> - struct input_dev *dev = w8001->dev;
> + struct input_dev *dev = w8001->touch_dev;
> unsigned int x = coord->x;
> unsigned int y = coord->y;
>
> @@ -271,7 +270,6 @@ static void report_single_touch(struct w8001 *w8001,
> struct w8001_coord *coord)
> input_report_abs(dev, ABS_X, x);
> input_report_abs(dev, ABS_Y, y);
> input_report_key(dev, BTN_TOUCH, coord->tsw);
> - input_report_key(dev, BTN_TOOL_FINGER, coord->tsw);
>
> input_sync(dev);
>
> @@ -369,20 +367,36 @@ static int w8001_command(struct w8001 *w8001, unsigned
> char command,
> static int w8001_open(struct input_dev *dev)
> {
> struct w8001 *w8001 = input_get_drvdata(dev);
> + int err;
>
> - return w8001_command(w8001, W8001_CMD_START, false);
> + err = mutex_lock_interruptible(&w8001->mutex);
> + if (err)
> + return err;
> +
> + if (w8001->open_count++ == 0) {
> + err = w8001_command(w8001, W8001_CMD_START, false);
> + if (err)
> + w8001->open_count--;
> + }
> +
> + mutex_unlock(&w8001->mutex);
> + return err;
> }
>
> static void w8001_close(struct input_dev *dev)
> {
> struct w8001 *w8001 = input_get_drvdata(dev);
>
> - w8001_command(w8001, W8001_CMD_STOP, false);
> + mutex_lock(&w8001->mutex);
> +
> + if (--w8001->open_count == 0)
> + w8001_command(w8001, W8001_CMD_STOP, false);
> +
> + mutex_unlock(&w8001->mutex);
> }
>
> static int w8001_detect(struct w8001 *w8001)
> {
> - struct input_dev *dev = w8001->dev;
> int error;
>
> error = w8001_command(w8001, W8001_CMD_STOP, false);
> @@ -391,18 +405,13 @@ static int w8001_detect(struct w8001 *w8001)
>
> msleep(250); /* wait 250ms before querying the device */
>
> - __set_bit(EV_KEY, dev->evbit);
> - __set_bit(EV_ABS, dev->evbit);
> - strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
> -
> - __set_bit(INPUT_PROP_DIRECT, dev->propbit);
> -
> return 0;
> }
>
> -static int w8001_setup_pen(struct w8001 *w8001)
> +static int w8001_setup_pen(struct w8001 *w8001, char *basename,
> + size_t basename_sz)
> {
> - struct input_dev *dev = w8001->dev;
> + struct input_dev *dev = w8001->pen_dev;
> struct w8001_coord coord;
> int error;
>
> @@ -411,11 +420,14 @@ static int w8001_setup_pen(struct w8001 *w8001)
> if (error)
> return error;
>
> + __set_bit(EV_KEY, dev->evbit);
> + __set_bit(EV_ABS, dev->evbit);
> __set_bit(BTN_TOUCH, dev->keybit);
> __set_bit(BTN_TOOL_PEN, dev->keybit);
> __set_bit(BTN_TOOL_RUBBER, dev->keybit);
> __set_bit(BTN_STYLUS, dev->keybit);
> __set_bit(BTN_STYLUS2, dev->keybit);
> + __set_bit(INPUT_PROP_DIRECT, dev->propbit);
>
> parse_pen_data(w8001->response, &coord);
> w8001->max_pen_x = coord.x;
> @@ -432,17 +444,19 @@ static int w8001_setup_pen(struct w8001 *w8001)
> }
>
> w8001->id = 0x90;
> - strlcat(w8001->name, " Penabled", sizeof(w8001->name));
> + strlcat(basename, " Penabled", basename_sz);
>
> return 0;
> }
>
> -static int w8001_setup_touch(struct w8001 *w8001)
> +static int w8001_setup_touch(struct w8001 *w8001, char *basename,
> + size_t basename_sz)
> {
> - struct input_dev *dev = w8001->dev;
> + struct input_dev *dev = w8001->touch_dev;
> struct w8001_touch_query touch;
> int error;
>
> +
> /* Touch enabled? */
> error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
> if (error)
> @@ -454,8 +468,10 @@ static int w8001_setup_touch(struct w8001 *w8001)
> if (!w8001->response[1])
> return -ENXIO;
>
> + __set_bit(EV_KEY, dev->evbit);
> + __set_bit(EV_ABS, dev->evbit);
> __set_bit(BTN_TOUCH, dev->keybit);
> - __set_bit(BTN_TOOL_FINGER, dev->keybit);
> + __set_bit(INPUT_PROP_DIRECT, dev->propbit);
>
> parse_touchquery(w8001->response, &touch);
> w8001->max_touch_x = touch.x;
> @@ -478,14 +494,14 @@ static int w8001_setup_touch(struct w8001 *w8001)
> case 2:
> w8001->pktlen = W8001_PKTLEN_TOUCH93;
> w8001->id = 0x93;
> - strlcat(w8001->name, " 1FG", sizeof(w8001->name));
> + strlcat(basename, " 1FG", basename_sz);
> break;
>
> case 1:
> case 3:
> case 4:
> w8001->pktlen = W8001_PKTLEN_TOUCH9A;
> - strlcat(w8001->name, " 1FG", sizeof(w8001->name));
> + strlcat(basename, " 1FG", basename_sz);
> w8001->id = 0x9a;
> break;
>
> @@ -501,7 +517,7 @@ static int w8001_setup_touch(struct w8001 *w8001)
> input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
> 0, MT_TOOL_MAX, 0, 0);
>
> - strlcat(w8001->name, " 2FG", sizeof(w8001->name));
> + strlcat(basename, " 2FG", basename_sz);
> if (w8001->max_pen_x && w8001->max_pen_y)
> w8001->id = 0xE3;
> else
> @@ -509,11 +525,27 @@ static int w8001_setup_touch(struct w8001 *w8001)
> break;
> }
>
> - strlcat(w8001->name, " Touchscreen", sizeof(w8001->name));
> + strlcat(basename, " Touchscreen", basename_sz);
>
> return 0;
> }
>
> +static void w8001_set_devdata(struct input_dev *dev, struct w8001 *w8001,
> + struct serio *serio)
> +{
> + dev->phys = w8001->phys;
> + dev->id.bustype = BUS_RS232;
> + dev->id.product = w8001->id;
> + dev->id.vendor = 0x056a;
> + dev->id.version = 0x0100;
> + dev->open = w8001_open;
> + dev->close = w8001_close;
> +
> + dev->dev.parent = &serio->dev;
> +
> + input_set_drvdata(dev, w8001);
> +}
> +
> /*
> * w8001_disconnect() is the opposite of w8001_connect()
> */
> @@ -524,7 +556,10 @@ static void w8001_disconnect(struct serio *serio)
>
> serio_close(serio);
>
> - input_unregister_device(w8001->dev);
> + if (w8001->pen_dev)
> + input_unregister_device(w8001->pen_dev);
> + if (w8001->touch_dev)
> + input_unregister_device(w8001->touch_dev);
> kfree(w8001);
>
> serio_set_drvdata(serio, NULL);
> @@ -539,18 +574,23 @@ static void w8001_disconnect(struct serio *serio)
> static int w8001_connect(struct serio *serio, struct serio_driver *drv)
> {
> struct w8001 *w8001;
> - struct input_dev *input_dev;
> + struct input_dev *input_dev_pen;
> + struct input_dev *input_dev_touch;
> + char basename[64];
> int err, err_pen, err_touch;
>
> w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL);
> - input_dev = input_allocate_device();
> - if (!w8001 || !input_dev) {
> + input_dev_pen = input_allocate_device();
> + input_dev_touch = input_allocate_device();
> + if (!w8001 || !input_dev_pen || !input_dev_touch) {
> err = -ENOMEM;
> goto fail1;
> }
>
> w8001->serio = serio;
> - w8001->dev = input_dev;
> + w8001->pen_dev = input_dev_pen;
> + w8001->touch_dev = input_dev_touch;
> + mutex_init(&w8001->mutex);
> init_completion(&w8001->cmd_done);
> snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
>
> @@ -563,38 +603,63 @@ static int w8001_connect(struct serio *serio, struct
> serio_driver *drv)
> if (err)
> goto fail3;
>
> - err_pen = w8001_setup_pen(w8001);
> - err_touch = w8001_setup_touch(w8001);
> + /* For backwards-compatibility we compose the basename based on
> + * capabilities and then just append the tool type
> + */
> + strlcpy(basename, "Wacom Serial", sizeof(basename));
> +
> + err_pen = w8001_setup_pen(w8001, basename, sizeof(basename));
> + err_touch = w8001_setup_touch(w8001, basename, sizeof(basename));
> if (err_pen && err_touch) {
> err = -ENXIO;
> goto fail3;
> }
>
> - input_dev->name = w8001->name;
> - input_dev->phys = w8001->phys;
> - input_dev->id.product = w8001->id;
> - input_dev->id.bustype = BUS_RS232;
> - input_dev->id.vendor = 0x056a;
> - input_dev->id.version = 0x0100;
> - input_dev->dev.parent = &serio->dev;
> + if (!err_pen) {
> + strlcpy(w8001->pen_name, basename, sizeof(w8001->pen_name));
> + strlcat(w8001->pen_name, " Pen", sizeof(w8001->pen_name));
> + input_dev_pen->name = w8001->pen_name;
>
> - input_dev->open = w8001_open;
> - input_dev->close = w8001_close;
> + w8001_set_devdata(input_dev_pen, w8001, serio);
>
> - input_set_drvdata(input_dev, w8001);
> + err = input_register_device(w8001->pen_dev);
> + if (err)
> + goto fail3;
> + } else {
> + input_free_device(input_dev_pen);
> + input_dev_pen = NULL;
> + w8001->pen_dev = NULL;
> + }
>
> - err = input_register_device(w8001->dev);
> - if (err)
> - goto fail3;
> + if (!err_touch) {
> + strlcpy(w8001->touch_name, basename,
> sizeof(w8001->touch_name));
> + strlcat(w8001->touch_name, " Finger",
> + sizeof(w8001->touch_name));
> + input_dev_touch->name = w8001->touch_name;
> +
> + w8001_set_devdata(input_dev_touch, w8001, serio);
> +
> + err = input_register_device(w8001->touch_dev);
> + if (err)
> + goto fail4;
> + } else {
> + input_free_device(input_dev_touch);
> + input_dev_touch = NULL;
> + w8001->touch_dev = NULL;
> + }
>
> return 0;
>
> +fail4:
> + if (w8001->pen_dev)
> + input_unregister_device(w8001->pen_dev);
> fail3:
> serio_close(serio);
> fail2:
> serio_set_drvdata(serio, NULL);
> fail1:
> - input_free_device(input_dev);
> + input_free_device(input_dev_pen);
> + input_free_device(input_dev_touch);
> kfree(w8001);
> return err;
> }
> --
> 2.5.0
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
