Hi,
this is my first try, will write a little bit more, when I have a little
bit more time.
Regards,
Martin
On 19 Sep 1999, Dag Brattli wrote:
> Hi,
>
> I've now updated the hardware page a bit, but I really need more
> entries, and especially I need one from you!!!
>
> So please send me more entries! You can now look at the how each entry are
> made, by looking at the .wml file (link at the bottom of each page). So
> send me the information you have about your laptop, or some other device
> that uses IrDA successfully with Linux-IrDA.
>
> It would also be great if you could mail any additional information for a
> device already registered in the hardware survey.
>
> Thanks a lot!
>
> -- Dag
>
>
--
If the box says 'Windows 95 or better', it should run on Linux, right?
- anonymous
For public PGP-key: finger [EMAIL PROTECTED]
#include <laptop-template.wml> mytitle="IBM ThinkPad 770"
<model>
IBM ThinkPad 770
</model>
<features>
Intel Pentium MMX at 233MHz
<p>
13.3" XGA TFT screen (1024x768)
<p>
2 Type II PC-Card slot
<p>
1 USB port
<p>
2 IrDA ports (front/rear)
</features>
<image>
http://commerce.www.ibm.com/c_images/psg/840/en_US/a0a2_0.gif
</image>
<chipset>
SIR, FIR mode (9600bps - 4Mbps)
<p>
SIR mode is UART 16550 compatible (/dev/ttyS0)
</chipset>
<driver>
#include <irtty.wml>
</driver>
Usualy the IR Port has to be enabled using the configuration utility
<TT>PS2.EXE</TT> under DOS or the ThinkPad Configuration Utility under
Windows.
