Hi! I have never heard anyone who have IrDA on an Asus 7300 working so here are my tips: Set the IR config to SIR, 0x2f8, IRQ3 in the IO-config section in the BIOS-setup util. If you use PCMCIA you also need to add "exclude irq 3, irq 4, irq 5" in /etc/pcmcia/config.opts (may not be same on your system) Then do this (for 2.2.13-irda3 or 2.3.28) with irda-utils 0.9.5 installed (you must have this version 0.9.4 will NOT do): setserial /dev/ttyS1 uart 16550A insmod irda insmod irtty ...insmod other irda-modules as needed (ircomm etc) irattach /dev/ttyS1 -s 1 If you have an older kernel you can probably get things working too, but you are on your own then! /Pontus Fuchs _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
