Dag Brattli writes:
> use irda-utils-0.9.10!
Thanks, I missed this one (alphanumeric sorting strikes again).
Same problem with linux-2.3.49 and irda-utils-0.9.10, however.
After having a look at the irda specs at www.irda.org, I'm not sure
writing random bytes to /dev/ttyS1 is supposed to activate the leds.
If not, can anyone provide sample data that should do so ?
When I configure the Windows95 irda control panel for COM1 (RS232)
instead of COM2 (SIR port), I can read 0B 0B 0B 0B 0B 09 on the RS232
port (9600 8N1 ?). Does this look like regular irda or SIR commands ?
> What does ifconfig and cat /dev/interrupts say?
irda0 Link encap:IrLAP HWaddr 4a:fe:bd:cb
inet addr:192.168.200.100 Mask:255.255.255.0
UP RUNNING NOARP MTU:2048 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:8
CPU0
0: 172109 XT-PIC timer
1: 685 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 7654 XT-PIC serial
7: 3388 XT-PIC 3c589_cs
8: 1 XT-PIC rtc
13: 1 XT-PIC fpu
14: 18025 XT-PIC ide0
NMI: 0
ERR: 0
Linux ti 2.3.49 #4 Sun Mar 5 12:51:14 MET 2000 i586 unknown
Character devices:
1 mem
2 pty/m%d
3 pty/s%d
4 tts/%d
5 cua/%d
7 vcs
10 misc
36 netlink
128 ptm
136 pts/%d
161 ircomm
162 raw
254 pcmcia
Block devices:
2 fd
3 ide0
(boot)
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
(after running irmanager/irattach)
<6>IrDA: Registered device irda0
<7>irda_ioctl(), doing device ioctl!
<7>irda_ioctl(), doing device ioctl!
<7>irtty_net_open()
<7>irlap_change_speed(), setting speed to 9600
(after opening /dev/ircomm0)
<7>ircomm_tty_open(), ircomm0, count = 1
<7>ircomm_tty_attach_cable()
<7>ircomm_tty_ias_register()
<7>ircomm_tty_block_til_ready(), doing CLOCAL!
<7>ircomm_tty.c(352):block_til_ready blocking on ircomm open_count=0
-- Pascal Brisset
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
