Apparently, I was missing ifconfiging up irda0.
What should I put im my /etc/irda/drivers?
On Sun, 7 May 2000, Roberto Jung Drebes wrote:
>
> Hi there,
>
> I'm having problems again. I have smc-ircc loaded, with
> IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
> SMC IrDA Controller found; IrCC version 1.1, port 0x100, dma=3, irq=4
> IrDA: Registered device irda0
> in dmesg, but I'm not having anything displayed on irdadump.
>
> I echoed 1 to /proc/sys/net/irda/discovery
> I didn't call irattach, nor irmanager.
>
> I can't make irmanager modprobe smc-ircc directly, because first I need to
> rmmod serial. So I rmmod serial, modprobe smc-ircc and modprobe serial
> again. Otherwise the smc-ircc module won't find the chip.
>
> I'm using 2.2.15 and irda-utils-0.9.10 from RH 6.2.
>
> The modules loaded related to irda are:
> smc-ircc 5068 0 (unused)
> irport 4372 0 [smc-ircc]
> irda 74401 2 [smc-ircc irport]
>
> Any tips?
>
>
> --
> Roberto Jung Drebes <[EMAIL PROTECTED]>
> Porto Alegre, RS - Brasil
> http://www.inf.ufrgs.br/~drebes/
>
>
> _______________________________________________
> Linux-IrDA mailing list - [EMAIL PROTECTED]
> http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
>
--
Roberto Jung Drebes <[EMAIL PROTECTED]>
Porto Alegre, RS - Brasil
http://www.inf.ufrgs.br/~drebes/
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
