further to the earlier message, this is what findchip -v (from irdautils
0.9.13) reports
[root@tyro ~/irda-utils-0.9.13/findchip]# ./findchip -v
Found NSC PC87338 Controller at 0x2e, DevID=0x0b, Rev. 2
SIR Base 0x2f8, FIR Base 0x2f8
IRQ = 3, DMA = 3
Enabled: yes, Suspended: no
UART compatible: yes
Half duplex delay = 0 us
Rajesh
On Sun, 26 Nov 2000, Rajesh Krishna Balan wrote:
> Hi,
>
> the thinkpad has a nsc chip in it (PC97338 Super I/O / ISA) according to
> the IBM web page.
>
> when i do modprobe nsc-ircc i get the following error message.
>
> nsc-ircc, Found chip at base=0x02e
> nsc-ircc, driver loaded (Dag Brattli)
> nsc_ircc_open(), can't get iobase of 0x2f8
>
> this is with 2.4.0-test11 with Dag's latest patch to it.
>
> Any ideas? i can get it working in SIR mode using irattach.
>
> Thanks,
>
> Rajesh
>
>
>
>
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
