Hi all,
I've got am Idea Progress Notebook and IrDA port based
on SMC chipset. On the notebook I have installed
the kernel 2.2.18 and irda-utils 0.9.13.
Using findchip I get:
Found SMC FDC37N869 Controller at 0x3f0, DevID=0x02, Rev. 0
SIR Base 0x2f8, FIR Base 0x110
IRQ = 3, DMA = 3
Enabled: yes, Suspended: no
UART compatible: yes
Half duplex delay = 3 us
I have configured the port in SIR mode and IrDA runs.
When I try to configure the FIR mode by installing
smc-ircc module with modprobe smc-ircc I receive the
following error:
/sbin/insmod /lib/modules/2.2.18/misc/irport.o
Using /lib/modules/2.2.18/misc/irport.o
Symbol version prefix ''
/sbin/insmod /lib/modules/2.2.18/misc/smc-ircc.o
Using /lib/modules/2.2.18/misc/smc-ircc.o
/lib/modules/2.2.18/misc/smc-ircc.o: init_module: Dispositivo o
risorsa occupata
Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters
/lib/modules/2.2.18/misc/smc-ircc.o: insmod
/lib/modules/2.2.18/misc/smc-ircc.o
failed
# delete irport
/lib/modules/2.2.18/misc/smc-ircc.o: insmod smc-ircc failed
Is it a problem of module parameters or something different?
Davide
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
