Hi,
This is the old problem of ttyS1 sharing the address with SIR base. Run a
setserial /dev/ttyS1 uart none
and it will work.
--luiz
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 21, 2000 5:01 AM
Subject: Linux-IrDA digest, Vol 1 #215 - 1 msg
> Send Linux-IrDA mailing list submissions to
> [EMAIL PROTECTED]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
> or, via email, send a message with subject or body 'help' to
> [EMAIL PROTECTED]
>
> You can reach the person managing the list at
> [EMAIL PROTECTED]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Linux-IrDA digest..."
>
>
> Today's Topics:
>
> 1. About smc-ircc (Davide Dozza)
>
> --__--__--
>
> Message: 1
> Date: Wed, 20 Dec 2000 18:10:59 +0100
> From: Davide Dozza <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: [Linux-IrDA]About smc-ircc
> Reply-To: [EMAIL PROTECTED]
>
> Hi all,
>
> I've got am Idea Progress Notebook and IrDA port based
> on SMC chipset. On the notebook I have installed
> the kernel 2.2.18 and irda-utils 0.9.13.
>
> Using findchip I get:
>
> Found SMC FDC37N869 Controller at 0x3f0, DevID=0x02, Rev. 0
> SIR Base 0x2f8, FIR Base 0x110
> IRQ = 3, DMA = 3
> Enabled: yes, Suspended: no
> UART compatible: yes
> Half duplex delay = 3 us
>
> I have configured the port in SIR mode and IrDA runs.
> When I try to configure the FIR mode by installing
> smc-ircc module with modprobe smc-ircc I receive the
> following error:
>
> /sbin/insmod /lib/modules/2.2.18/misc/irport.o
> Using /lib/modules/2.2.18/misc/irport.o
> Symbol version prefix ''
> /sbin/insmod /lib/modules/2.2.18/misc/smc-ircc.o
> Using /lib/modules/2.2.18/misc/smc-ircc.o
> /lib/modules/2.2.18/misc/smc-ircc.o: init_module: Dispositivo o
> risorsa occupata
> Hint: insmod errors can be caused by incorrect module
> parameters, including invalid IO or IRQ parameters
> /lib/modules/2.2.18/misc/smc-ircc.o: insmod
> /lib/modules/2.2.18/misc/smc-ircc.o
> failed
> # delete irport
> /lib/modules/2.2.18/misc/smc-ircc.o: insmod smc-ircc failed
>
> Is it a problem of module parameters or something different?
>
> Davide
>
>
> --__--__--
>
> _______________________________________________
> Linux-IrDA mailing list - [EMAIL PROTECTED]
> http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
>
>
> End of Linux-IrDA Digest
>
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
