> Lars,
> Did you add your drives to
> const char *pdc_quirk_drives[] = {
> };
My current quirk_drives from pdc202xx.c
const char *pdc_quirk_drives[] = {
"QUANTUM FIREBALLlct08 08",
"QUANTUM FIREBALLlct10 30",
"QUANTUM FIREBALLlct15 30",
"QUANTUM FIREBALLP KA6.4",
"QUANTUM FIREBALLP LM20.4",
"QUANTUM FIREBALLP LM20.5",
NULL
};
> Since you are sharing interrupts with your printer, did you
> enable shared
> interrupts in the ata/ide driver?
Printerport is disabled in BIOS, but I have verified the existance of the problem
with the controller on different IRQ's.
I have CONFIG_PDC202XX_BURST set:
PDC20267: FORCING BURST BIT 0x00 -> 0x01 ACTIVE
.. and also checked on CONFIG_IDEDMA_AUTO, which gives no change turned on or off.
> PS 'ide.2.2.17.all.20000904.patch' is now on kernel.org
Any changes that _could_ affect my problem?
/lars
--
Lars Knudsen
[EMAIL PROTECTED]
http://www.callcentereurope.dk
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/