>Hi !
>This is a bug reporting, included are the output of various /proc file on
>my system:
>Motherboard: ASUS P2B-F with the latest bios bx2f113.awd (microcode update)
>ISDN: Winbond based card (Hisax type=36)
>Distribution: based on updated SuSE 6.4
>The problem is that if I compile the kernel (2.4.0-test8 pre1,pre2,pre3,pre4)
>with both ACPI support and ISDN support there is a conflict in irq 9.
>I think ACPI first get irq 9 and then Hisax can't get it. Consequentially
>Hisax doesn't work if ACPI support is enabled.
>With ACPI turned off, everything works fine as with previous kernel test6
>and test5 and ....
>Many thanx.
after further testing the problem seems to be in IRQ SHARING.
in fact, with acpi disabled, once the hisax has got irq 9 (it is not possible
for card type 36 to change the irq), i can load the ethernet modules
8390 and ne2k-pci for my ethernet PCI NE2000 card, but the ne2k-pci
driver also set its irq=9, so everytime i try to do:
ifconfig eth0 up
i get:
SIOCSIFFLAGS: resource temporarily unavailable
why don't add the irq parameter to the hisax winbond driver and to the
ne2k-pci driver ?
p.s.
my motherboard has pci slot 4 and slot 5 condivided and the isdn card is
on slot 4 while ethernet on slot 5.... so one may say "change your
motherboard", but everything worked fine with previous kernels (ACPI, Hisax,
ethernet)....
Please help me.
Many thanx.
Please answer only via email: [EMAIL PROTECTED]
--
bye,
Guido Trentalancia
CPU0
0: 140258 XT-PIC timer
1: 4460 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 425229 XT-PIC es1371
9: 9840 XT-PIC HiSax
10: 16940 XT-PIC aic7xxx
12: 53956 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
NMI: 0
ERR: 0
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
14 sound
43 ttyI
44 cui
45 isdn
128 ptm
136 pts
162 raw
Block devices:
8 sd
65 sd
66 sd
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
03c0-03df : vga+
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
b000-b01f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
b000-b01f : ne2k-pci
b400-b4ff : Adaptec AHA-2940U2/W
b400-b4fe : aic7xxx
b800-b83f : Ensoniq ES1371 [AudioPCI-97]
b800-b83f : es1371
d000-d0ff : Dynalink IS64PH ISDN Adapter
d000-d0ff : TA XXX
d400-d41f : Intel Corporation 82371AB PIIX4 USB
d800-d80f : Intel Corporation 82371AB PIIX4 IDE
e400-e43f : Intel Corporation 82371AB PIIX4 ACPI
e800-e81f : Intel Corporation 82371AB PIIX4 ACPI
Linux version 2.4.0-test8 (root@kleopatra) (gcc version 2.95.2 19991024 (release)) #1
Wed Sep 6 13:11:45 CEST 2000
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 701.599904
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36
mmx fxsr xmm
bogomips : 1399.19
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DNES-309170W Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: YAMAHA Model: CRW8424S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: Model: Scanner 636A4 Rev: 1.10
Type: Scanner ANSI SCSI revision: 02
