HI all,
Thanks for all the help. I have switched to a low-end 16-bit PCMCIA
network card by 3COM 3C589 10/BT. And now everything works as it
should. Before making this change, I thought that my problem was caused
by the TCP/IP layer -- between Linux and Sun, because I could get good
network performance between two Liux boxes. Anyhow, after start to use
this 3COM card, it works. So, I think the problem IS Xircom Cardbus
card related.
Thanks to all who responded! ... The best thing I got back from this
that the support from Linux is just good as ever... and it is the
problem with the Xircom driver, not the TCP/IP layer... :-)
Jack
David Hinds wrote:
>
> On Thu, Sep 07, 2000 at 03:34:46AM +0000, Andrew Morton wrote:
> >
> > Seconded. In both 2.2 (tulip_cb) and 2.4 (xircom_tulip_cb) on 100baseT
> > the driver reports a huge number of Tx carrier errors and sustains 50
> > mbits/sec on TCP Tx and 1 mbit/sec on TCP Rx. It should do 98 mbits/sec
> > each way (using netperf).
>
> This is fixed in my latest PCMCIA beta, on projects.sourceforge.net in
> /pub/pcmcia-cs/NEW.
>
> (there are two bugs... the driver doesn't monitor the MII to determine
> when to switch the Tulip into full duplex, and also, even in full
> duplex mode, the bogus Xircom chip still reports carrier errors)
>
> > And (less seriously), with or without Andrea's recent patch the
> > interface doesn't work after poweron or hotplug. It needs a down/up or
> > it needs to be set into promiscuous mode long enough to receive a
> > packet.
>
> I don't know what the deal is with the promiscuous thing. I find that
> with my card, Andrea's patch doesn't really make a difference; with or
> without it, the card sometimes needs to be toggled into promiscuous
> mode. It seems random.
>
> -- Dave
--
Jack Duan, [EMAIL PROTECTED]
Systems Architect, iPlanet Infrastructure Services
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
