Hello Martin , What information do you need to add this device to the lspci database (or whatever it is) ? Tia , JimL #lspci -v 00:0a.0 RAID bus controller: Mylex Corporation: Unknown device 0002 (rev 02) Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at b800 Memory at df000000 (32-bit, non-prefetchable) #dmesg DAC960: ***** DAC960 RAID Driver Version 2.2.7 of 1 August 2000 ***** DAC960: Copyright 1998-2000 by Leonard N. Zubkoff <[EMAIL PROTECTED]> DAC960#0: Configuring Mylex DAC960PD PCI RAID Controller DAC960#0: Firmware Version: 3.51-0-04, Channels: 3, Memory Size: 32MB DAC960#0: PCI Bus: 0, Device: 10, Function: 0, I/O Address: 0xB800 DAC960#0: PCI Address: 0xDF000000 mapped at 0xD0000000, IRQ Channel: 5 DAC960#0: Controller Queue Depth: 64, Maximum Blocks per Command: 128 DAC960#0: Driver Queue Depth: 63, Scatter/Gather Limit: 17 of 17 Segments DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 +----------------------------------------------------------------+ | James W. Laferriere | System Techniques | Give me VMS | | Network Engineer | 25416 22nd So | Give me Linux | | [EMAIL PROTECTED] | DesMoines WA 98198 | only on AXP | +----------------------------------------------------------------+ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/