Hello all...
No joy with this joystick and I'm not sure what I'm doing wrong.
I just received a Logitech USB Wingman Force Joystick. I have
the iforce module compiled and loaded and the it recognizes the USB
joystick.
/var/log/message:
Sep 18 15:09:32 alcove kernel: usb.c: USB new device connect, assigned device number 7
Sep 18 15:09:32 alcove kernel: input3: I-Force joystick/wheel on usb1:7.0
Sep 18 15:09:45 alcove kernel: usb.c: USB disconnect on device 7
Sep 18 15:10:28 alcove kernel: usb.c: USB new device connect, assigned device number 7
Sep 18 15:10:28 alcove kernel: input3: I-Force joystick/wheel on usb1:7.0
/proc/bus/usb/devices:
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c281 Rev= 1.00
S: Manufacturer=Logitech
S: Product=Wingman Force
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=iforce
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl= 8ms
E: Ad=01(O) Atr=03(Int.) MxPS= 32 Ivl= 4ms
Trouble is "jstest /dev/js0" says no such device.
My RedHat 6.2 system initially had the following js devices:
c 15 0 js0
c 15 1 js1
c 15 2 js2
c 15 3 js3
I was also getting these errors in /var/log/messages:
Sep 18 14:51:52 alcove modprobe: modprobe: Can't locate module char-major-15
The file linux/Documentation/joystick.txt says to use 13, 0-3,
so I changed it to this:
c 13 0 js0
c 13 1 js1
c 13 2 js2
c 13 3 js3
Still no go, but at least I'm not getting the modprobe errors now.
My USB mouse on c 13, 63 is working like a charm.
This is with kernel 2.4.0-test8
So, I assume that I'm still missing something obvious here. What?
Any thoughts anyone?
Mike
--
Michael H. Warfield | (770) 985-6132 | [EMAIL PROTECTED]
(The Mad Wizard) | (678) 463-0932 | http://www.wittsend.com/mhw/
NIC whois: MHW9 | An optimist believes we live in the best of all
PGP Key: 0xDF1DD471 | possible worlds. A pessimist is sure of it!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
