Jeff V. Merkey said once upon a time (Fri, 6 Oct 2000):
>
> Andre,
>
> BTW, how did your testing of the speed=4 problem with ide-scsi turn
> out. We are still seeing the speed=2 problem on 2.4.0-pre9. I cannot
> get the drive to burn clean unless the speed setting is cranked down to
> speed=2.
>
> Jeff
I just burned Red Hat 7.0 disk1 iso image at on a SCSI 4x burner without
any problems. I have an IDE Plextor 12x burner at work, Monday I'll try a
burn under 2.4.0-test9.
distro: Red Hat 7.0
kernel: 2.4.0-test9-pre8
Cdrecord 1.9
True SCSI Yamaha 4x burner
(scsi0) <Adaptec AHA-2940UW Pro Ultra SCSI host adapter> found at PCI 0/16/0
(scsi0:0:4:0) Synchronous at 8.0 Mbyte/sec, offset 15.
Vendor: YAMAHA Model: CRW4416S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
Uniform CD-ROM driver Revision: 3.11
sr1: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
[root@localhost burn]# md5sum redhat-7.0-disc1.iso
626b7d18033e320c27c8cd58cc37a288 redhat-7.0-disc1.iso
[did a 4x burn]
[root@localhost dkelson]# md5sum /dev/scd1
626b7d18033e320c27c8cd58cc37a288 /dev/scd1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
