On Sat, Oct 14, 2000 at 01:19:50PM +0200, Torben Mathiasen wrote: > > http://ulima.unil.ch/greg/linux/ > It would be much easier if you could try to narrow down exacly what breaks. > If these opps's are reproduceable, please try removing some of your drivers. > SCSI had an overhaul lately, so it seem like a good place to start. Well, for sure after every dvb released (I have only one dvb card, the other is one bttv), I got in dmesg: bttv0: i2c detach [Philips PAL] i2c-core.o: client [Philips PAL] unregistered. bttv0: i2c detach [MSP3410D-B4] i2c-core.o: client [MSP3410D-B4] unregistered. bttv0: i2c detach [ir] i2c-core.o: client [ir] unregistered. i2c-core.o: adapter unregistered: bt848 #0 dvb: ARM firmware successfully loaded. dvb: firmware = f0240009 dvb: MAC = 00 d0 5c 00 41 90 dvb: attach_adapter i2c-core.o: driver unregistered: dvbi2c dvb: 2 dvb(s) released properly. Unable to handle kernel paging request at virtual address d3323548 Maybe that's came from the way I autoload them in modules.conf: #dvb alias char-major-81 dvb alias char-major-81-0 dvb options saa7146_core mode=0 pre-install dvb modprobe i2c-core; modprobe videodev; modprobe saa7146_core; modprobe saa7146_v4l post-install dvb modprobe VES1893; modprobe dvb-tuner; modprobe msp3400 # bttv alias char-major-81-1 bttv pre-install bttv modprobe msp3400; modprobe tuner ; modprobe lirc_haup options bttv radio=1 card=10 options tuner debug=1 type=5 Do someone know a good way to autoload these modules (and I don't want them to unregister...)? Thanks you very much, and if I need to compil a kernel with some option less, just tell me, and please, keep CCing to me, I am not on the list... Greg ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:[EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
