From: Mark Yao <y...@rock-chips.com> Add bpc and color mode setting in rockchip_drm_vop driver, so connector could try to use the edid drm_display_info to config vop output mode.
Signed-off-by: Mark Yao <y...@rock-chips.com> Signed-off-by: Yakir Yang <y...@rock-chips.com> --- Changes in v7: None Changes in v6: None Changes in v5: - Fix compiled error (Heiko) - Using the connector display info message to configure eDP driver input video mode, but hard code CRTC video output mode to RGBaaa. Changes in v4: None Changes in v3: None Changes in v2: None drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 25 +++++++++++++++---- drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +- drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 32 ++++++++++++++++++++++--- 4 files changed, 51 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index 2c82a9a..3990951 100644 --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c @@ -180,14 +180,29 @@ static void rockchip_dp_drm_encoder_mode_set(struct drm_encoder *encoder, static void rockchip_dp_drm_encoder_prepare(struct drm_encoder *encoder) { struct rockchip_dp_device *dp = to_dp(encoder); + struct drm_connector *cn = &dp->connector; + int ret = -1; u32 val; - int ret; - ret = rockchip_drm_crtc_mode_config(encoder->crtc, - DRM_MODE_CONNECTOR_eDP, - ROCKCHIP_OUT_MODE_AAAA); + /* + * FIXME(Yakir): driver should configure the CRTC output video + * mode with the display information which indicated the monitor + * support colorimetry. + * + * But don't know why the CRTC driver seems could only output the + * RGBaaa rightly. For example, if connect the "innolux,n116bge" + * eDP screen, EDID would indicated that screen only accepted the + * 6bpc mode. But if I configure CRTC to RGB666 output, then eDP + * screen would show a blue picture (RGB888 show a green picture). + * But if I configure CTRC to RGBaaa, and eDP driver still keep + * RGB666 input video mode, then screen would works prefect. + */ + if (cn->display_info.color_formats & DRM_COLOR_FORMAT_RGB444) + ret = rockchip_drm_crtc_mode_config(encoder->crtc, + DRM_MODE_CONNECTOR_eDP, + 10, DRM_COLOR_FORMAT_RGB444); if (ret < 0) { - dev_err(dp->dev, "Could not set crtc mode config: %d.\n", ret); + dev_err(dp->dev, "Could not set crtc mode config (%d)\n", ret); return; } diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c index 80d6fc8..428a3c1 100644 --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c @@ -215,7 +215,7 @@ static void dw_hdmi_rockchip_encoder_commit(struct drm_encoder *encoder) static void dw_hdmi_rockchip_encoder_prepare(struct drm_encoder *encoder) { rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_HDMIA, - ROCKCHIP_OUT_MODE_AAAA); + 10, DRM_COLOR_FORMAT_RGB444); } static struct drm_encoder_helper_funcs dw_hdmi_rockchip_encoder_helper_funcs = { diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h index dc4e5f0..ef1d7fb 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h @@ -59,7 +59,7 @@ void rockchip_unregister_crtc_funcs(struct drm_device *dev, int pipe); int rockchip_drm_encoder_get_mux_id(struct device_node *node, struct drm_encoder *encoder); int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc, int connector_type, - int out_mode); + int bpc, int color); int rockchip_drm_dma_attach_device(struct drm_device *drm_dev, struct device *dev); void rockchip_drm_dma_detach_device(struct drm_device *drm_dev, diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index 5d8ae5e..9ef4a1f 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -1062,14 +1062,40 @@ static const struct drm_plane_funcs vop_plane_funcs = { int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc, int connector_type, - int out_mode) + int bpc, int color) { struct vop *vop = to_vop(crtc); + /* + * RK3288 vop only support RGB Color output. + */ + if (color != DRM_COLOR_FORMAT_RGB444) { + DRM_ERROR("Only support output RGB444, not support%d\n", + color); + return -EINVAL; + } + vop->connector_type = connector_type; - vop->connector_out_mode = out_mode; - return 0; + /* + * Fixme: I don't know how to describe the ROCKCHIP_OUT_MODE_P565's + * bpc, 5 or 6? + */ + if (bpc >= 10) { + bpc = 10; + vop->connector_out_mode = ROCKCHIP_OUT_MODE_AAAA; + } else if (bpc >= 8) { + bpc = 8; + vop->connector_out_mode = ROCKCHIP_OUT_MODE_P888; + } else if (bpc >= 6) { + bpc = 6; + vop->connector_out_mode = ROCKCHIP_OUT_MODE_P666; + } else { + DRM_ERROR("unsupport bpc %d\n", bpc); + return -EINVAL; + } + + return bpc; } EXPORT_SYMBOL_GPL(rockchip_drm_crtc_mode_config); -- 2.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/