* Robert Hancock <[EMAIL PROTECTED]> [061202 13:33]: > >[ 27.337641] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > >[ 27.344035] ide: Assuming 33MHz system bus speed for PIO modes; > >override with idebus=xx > >[ 27.352191] Probing IDE interface ide0... > >[ 28.145997] hda: PLEXTOR DVDR PX-716AL, ATAPI CD/DVD-ROM drive > >[ 28.457643] Probing IDE interface ide1... > >[ 28.970267] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > Hmm. Something seems missing here. Chipset-specific driver not enabled? > I don't see any references to DMA mode or the controller type. It seems > like in this case something in drivers/ide is blowing up later on (which > shouldn't happen in any case but that code is not the greatest). > > Myself, I would try disabling CONFIG_IDE entirely and enabling the > corresponding new libata PATA driver for this chipset's PATA ports (for > nForce4 it will be pata_amd). Even if it still doesn't work it may allow > the real problem to be diagnosed more easily.
Robert, thanks for taking time to look at the output.
I am not using anything on the PATA chain, other then the DVD drive --
which has sat idle during all of this.
BTW, I did have this in my config already...
CONFIG_ATA=y
CONFIG_SATA_NV=y
Thanks for the suggestion. I can certainly disable CONFIG_IDE and try
again.
-Bart
--
WebSig: http://www.jukie.net/~bart/sig/
signature.asc
Description: Digital signature
