From: Thomas Abraham <thomas...@samsung.com>

The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
27 LDO and 10 Buck regulators and allows programming these regulators via a
I2C interface. This patch adds initial support for LDO/Buck regulators of
S2MPS15 PMIC.

Signed-off-by: Thomas Abraham <thomas...@samsung.com>
Signed-off-by: Alim Akhtar <alim.akh...@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
---
 drivers/regulator/Kconfig   |    4 +-
 drivers/regulator/s2mps11.c |  135 ++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 136 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 64bccff557be..3e3ee5b88b3f 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -588,10 +588,10 @@ config REGULATOR_S2MPA01
         via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 
 config REGULATOR_S2MPS11
-       tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
+       tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
        depends on MFD_SEC_CORE
        help
-        This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
+        This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
         output regulator via I2C bus. The chip is comprised of high efficient
         Buck converters including Dual-Phase Buck converter, Buck-Boost
         converter, various LDOs.
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 72fc3c32db49..12c59158552c 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -32,6 +32,7 @@
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
 #include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
 #include <linux/mfd/samsung/s2mpu02.h>
 
 /* The highest number of possible regulators for supported devices. */
@@ -661,6 +662,133 @@ static const struct regulator_desc s2mps14_regulators[] = 
{
                                    S2MPS14_BUCK1235_START_SEL),
 };
 
+static struct regulator_ops s2mps15_reg_ldo_ops = {
+       .list_voltage           = regulator_list_voltage_linear_range,
+       .map_voltage            = regulator_map_voltage_linear_range,
+       .is_enabled             = regulator_is_enabled_regmap,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops s2mps15_reg_buck_ops = {
+       .list_voltage           = regulator_list_voltage_linear_range,
+       .map_voltage            = regulator_map_voltage_linear_range,
+       .is_enabled             = regulator_is_enabled_regmap,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+       .set_voltage_time_sel   = regulator_set_voltage_time_sel,
+};
+
+#define regulator_desc_s2mps15_ldo(num, range) {       \
+       .name           = "LDO"#num,                    \
+       .id             = S2MPS15_LDO##num,             \
+       .ops            = &s2mps15_reg_ldo_ops,         \
+       .type           = REGULATOR_VOLTAGE,            \
+       .owner          = THIS_MODULE,                  \
+       .linear_ranges  = range,                        \
+       .n_linear_ranges = ARRAY_SIZE(range),           \
+       .n_voltages     = S2MPS15_LDO_N_VOLTAGES,       \
+       .vsel_reg       = S2MPS15_REG_L1CTRL + num - 1, \
+       .vsel_mask      = S2MPS15_LDO_VSEL_MASK,        \
+       .enable_reg     = S2MPS15_REG_L1CTRL + num - 1, \
+       .enable_mask    = S2MPS15_ENABLE_MASK           \
+}
+
+#define regulator_desc_s2mps15_buck(num, range) {                      \
+       .name           = "BUCK"#num,                                   \
+       .id             = S2MPS15_BUCK##num,                            \
+       .ops            = &s2mps15_reg_buck_ops,                        \
+       .type           = REGULATOR_VOLTAGE,                            \
+       .owner          = THIS_MODULE,                                  \
+       .linear_ranges  = range,                                        \
+       .n_linear_ranges = ARRAY_SIZE(range),                           \
+       .ramp_delay     = 12500,                                        \
+       .n_voltages     = S2MPS15_BUCK_N_VOLTAGES,                      \
+       .vsel_reg       = S2MPS15_REG_B1CTRL2 + ((num - 1) * 2),        \
+       .vsel_mask      = S2MPS15_BUCK_VSEL_MASK,                       \
+       .enable_reg     = S2MPS15_REG_B1CTRL1 + ((num - 1) * 2),        \
+       .enable_mask    = S2MPS15_ENABLE_MASK                           \
+}
+
+/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
+       REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
+};
+
+/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
+       REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
+};
+
+/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
+       REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
+};
+
+/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
+       REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000),
+};
+
+/* voltage range for s2mps15 LDO 1 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
+       REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
+};
+
+/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
+static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
+       REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250),
+};
+
+/* voltage range for s2mps15 BUCK 8, 9 and 10 */
+static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
+       REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500),
+};
+
+static const struct regulator_desc s2mps15_regulators[] = {
+       regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5),
+       regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2),
+       regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1),
+       regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3),
+       regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1),
+       regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2),
+       regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4),
+       regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4),
+       regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4),
+       regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4),
+       regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3),
+       regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3),
+       regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3),
+       regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2),
+       regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1),
+       regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1),
+       regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2),
+       regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1),
+       regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2),
+       regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1),
+       regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2),
+       regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3),
+       regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1),
+       regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2),
+       regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2),
+       regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3),
+       regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1),
+       regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1),
+       regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1),
+       regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1),
+       regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1),
+       regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1),
+       regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1),
+       regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1),
+       regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2),
+       regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2),
+       regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2),
+};
+
 static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
                struct regulator_dev *rdev)
 {
@@ -974,6 +1102,10 @@ static int s2mps11_pmic_probe(struct platform_device 
*pdev)
                regulators = s2mps14_regulators;
                BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num);
                break;
+       case S2MPS15X:
+               s2mps11->rdev_num = ARRAY_SIZE(s2mps15_regulators);
+               regulators = s2mps15_regulators;
+               break;
        case S2MPU02:
                s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
                regulators = s2mpu02_regulators;
@@ -1070,6 +1202,7 @@ static const struct platform_device_id s2mps11_pmic_id[] 
= {
        { "s2mps11-pmic", S2MPS11X},
        { "s2mps13-pmic", S2MPS13X},
        { "s2mps14-pmic", S2MPS14X},
+       { "s2mps15-pmic", S2MPS15X},
        { "s2mpu02-pmic", S2MPU02},
        { },
 };
@@ -1097,5 +1230,5 @@ module_exit(s2mps11_pmic_exit);
 
 /* Module information */
 MODULE_AUTHOR("Sangbeom Kim <sbki...@samsung.com>");
-MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPU02 Regulator Driver");
+MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
 MODULE_LICENSE("GPL");
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to