when checking for the value of the shunt resistor.
Signed-off-by: Marc Titinger <mtitin...@baylibre.com>
---
drivers/hwmon/ina2xx.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 3edd163..1946433 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -414,7 +414,6 @@ static const struct attribute_group ina226_group = {
static int ina2xx_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct ina2xx_platform_data *pdata;
struct device *dev = &client->dev;
struct ina2xx_data *data;
struct device *hwmon_dev;
@@ -425,14 +424,13 @@ static int ina2xx_probe(struct i2c_client *client,
if (!data)
return -ENOMEM;
- if (dev_get_platdata(dev)) {
- pdata = dev_get_platdata(dev);
- data->rshunt = pdata->shunt_uohms;
- } else if (!of_property_read_u32(dev->of_node,
- "shunt-resistor", &val)) {
- data->rshunt = val;
- } else {
- data->rshunt = INA2XX_RSHUNT_DEFAULT;
+ if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
+ struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
+
+ if (pdata)
+ val = pdata->shunt_uohms;
+ else
+ val = INA2XX_RSHUNT_DEFAULT;
}
/* set the device type */
@@ -440,10 +438,11 @@ static int ina2xx_probe(struct i2c_client *client,
data->config = &ina2xx_config[data->kind];
data->client = client;
- if (data->rshunt <= 0 ||
- data->rshunt > data->config->calibration_factor)
+ if (val <= 0 || val > data->config->calibration_factor)
return -ENODEV;
+ data->rshunt = val;
+
ina2xx_regmap_config.max_register = data->config->registers;
data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
