COMEDI drivers often allow the last value written to a channel on an analog output subdevice to be read back via the "insn_read" handler. The "comedi_test" driver does not currently support that. It is a bit special because it loops back the last values written to the channel on the analog output subdevice to be read back via corresponding channels on the analog input subdevice. The "insn_read" handler for the analog input subdevice is `waveform_ai_insn_read()`. Set that as the "insn_read" handler for the analog output subdevice as well.
Signed-off-by: Ian Abbott <abbo...@mev.co.uk> --- drivers/staging/comedi/drivers/comedi_test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c index a750f84..468847a 100644 --- a/drivers/staging/comedi/drivers/comedi_test.c +++ b/drivers/staging/comedi/drivers/comedi_test.c @@ -457,6 +457,7 @@ static int waveform_attach(struct comedi_device *dev, s->maxdata = 0xffff; s->range_table = &waveform_ai_ranges; s->insn_write = waveform_ao_insn_write; + s->insn_read = waveform_ai_insn_read; /* do same as AI insn_read */ /* Our default loopback value is just a 0V flatline */ for (i = 0; i < s->n_chan; i++) -- 2.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/