start_tx must start transmitting characters. Regardless of the state of
the circular buffer, always enable the transmitter hardware.
Signed-off-by: Soren Brinkmann <soren.brinkm...@xilinx.com>
---
drivers/tty/serial/xilinx_uartps.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c
b/drivers/tty/serial/xilinx_uartps.c
index 2c98c357d9a0..df6778d17949 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -512,9 +512,6 @@ static void cdns_uart_start_tx(struct uart_port *port)
{
unsigned int status, numbytes = port->fifosize;
- if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
- return;
-
/*
* Set the TX enable bit and clear the TX disable bit to enable the
* transmitter.
@@ -524,6 +521,9 @@ static void cdns_uart_start_tx(struct uart_port *port)
status |= CDNS_UART_CR_TX_EN;
writel(status, port->membase + CDNS_UART_CR_OFFSET);
+ if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
+ return;
+
while (numbytes-- && ((readl(port->membase + CDNS_UART_SR_OFFSET) &
CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
/* Break if no more data available in the UART buffer */
--
2.6.2.3.ga463a5b
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
