Hi Krzysztof,
On 11/07/2015 08:39 AM, Krzysztof Kozlowski wrote:
W dniu 07.11.2015 o 07:33, Rob Herring pisze:
On Fri, Oct 30, 2015 at 11:55:31AM +0530, Alim Akhtar wrote:
From: Thomas Abraham <thomas...@samsung.com>
Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
This also supports RTC and three 32.768KHz clock outputs.
Cc: devicet...@vger.kernel.org
Signed-off-by: Thomas Abraham <thomas...@samsung.com>
Signed-off-by: Alim Akhtar <alim.akh...@samsung.com>
---
Documentation/devicetree/bindings/mfd/s2mps11.txt | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt
b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 890f0b0e1643..4c0543ceec25 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,8 +7,12 @@ interfaced to the host controller using an I2C interface. Each
sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
- or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
+- compatible: Should be one of the following
+ - "samsung,s2mps11-pmic"
+ - "samsung,s2mps13-pmic"
+ - "samsung,s2mps14-pmic"
+ - "samsung,s2mps15-pmic"
+ - "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
@@ -24,7 +28,7 @@ Optional properties:
unwanted buck warm reset (setting buck voltages to default values).
Optional nodes:
-- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT)
buffered 32.768
s5m8767 doesn't seem to be documented. Can you please fix or remove.
What exactly do you have in mind?
The s5m8767-clk is already documented as part of clk-s2mps11.c driver:
Documentation/devicetree/bindings/mfd/s2mps11.txt
The main s5m8767 MFD driver is documented as part of regulator driver:
Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
Yes, this may be confusing... They S2M and S5M family devices share:
- main mfd driver,
- rtc driver,
- clk driver.
but regulator drivers are separate.
Indeed things are documented but in very confusing manners, e.g.
compatible name "samsung,s5m8767-pmic" belongs to MFD not regulator.
It should have being in */bindings/mfd/s2mps11.txt
Not sure if it make sense to change it though.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
