On 12 November 2015 19:06:23 GMT+00:00, Mason <slash....@free.fr> wrote:
>On 12/11/2015 18:40, Mans Rullgard wrote:
>> Commit 77a993942 "phy/at8031: enable at8031 to work on interrupt
>mode"
>> added interrupt support for the 8031 PHY but left out the other two
>> chips supported by this driver.
>>
>> This patch sets the .ack_interrupt and .config_intr functions for the
>> 8030 and 8035 drivers as well.
>>
>> Signed-off-by: Mans Rullgard <m...@mansr.com>
>> ---
>> I have only tested this with an 8035. I can't find a datasheet for
>> the 8030, but since 8031, 8032, and 8035 all have the same register
>> layout, there's a good chance 8030 does as well.
>> ---
>> drivers/net/phy/at803x.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
>> index fabf11d..2d020a3 100644
>> --- a/drivers/net/phy/at803x.c
>> +++ b/drivers/net/phy/at803x.c
>> @@ -308,6 +308,8 @@ static struct phy_driver at803x_driver[] = {
>> .flags = PHY_HAS_INTERRUPT,
>> .config_aneg = genphy_config_aneg,
>> .read_status = genphy_read_status,
>> + .ack_interrupt = at803x_ack_interrupt,
>> + .config_intr = at803x_config_intr,
>> .driver = {
>> .owner = THIS_MODULE,
>> },
>> @@ -327,6 +329,8 @@ static struct phy_driver at803x_driver[] = {
>> .flags = PHY_HAS_INTERRUPT,
>> .config_aneg = genphy_config_aneg,
>> .read_status = genphy_read_status,
>> + .ack_interrupt = at803x_ack_interrupt,
>> + .config_intr = at803x_config_intr,
>> .driver = {
>> .owner = THIS_MODULE,
>> },
>
>Shouldn't we take the opportunity to clean up the duplicated register
>definitions? (I'll send an informal patch to spur discussion.)
>
>Regards.
That can be done independently. Feel free to send a patch.
--
Måns Rullgård
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
