Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---

 arch/arm/boot/dts/omap4-panda-a4.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts 
b/arch/arm/boot/dts/omap4-panda-a4.dts
index 133f1b74e8ae..78d363177762 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -13,8 +13,8 @@
 /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
 &dss_hdmi_pins {
        pinctrl-single,pins = <
-               0x5a (PIN_INPUT_PULLUP | MUX_MODE0)     /* hdmi_cec.hdmi_cec */
-               0x5c (PIN_INPUT | MUX_MODE0)            /* hdmi_scl.hdmi_scl */
-               0x5e (PIN_INPUT | MUX_MODE0)            /* hdmi_sda.hdmi_sda */
+               OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)        /* 
hdmi_cec.hdmi_cec */
+               OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)               /* 
hdmi_scl.hdmi_scl */
+               OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)               /* 
hdmi_sda.hdmi_sda */
                >;
 };
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to