On 21.11.2015 06:40, Cory Tusar wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 11/19/2015 12:50 AM, Vladimir Zapolskiy wrote:
>> Hi Cory,
>>
>> On 19.11.2015 05:29, Cory Tusar wrote:
>>> This commit implements bindings in the eeprom_93xx46 driver allowing
>>> device word size and read-only attributes to be specified via
>>> devicetree.
>>>
>>> Signed-off-by: Cory Tusar <cory.tu...@pid1solutions.com>
>>> ---
>>> drivers/misc/eeprom/eeprom_93xx46.c | 62
>>> +++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 62 insertions(+)
>>>
>>> diff --git a/drivers/misc/eeprom/eeprom_93xx46.c
>>> b/drivers/misc/eeprom/eeprom_93xx46.c
>>> index e1bf0a5..1f29d9a 100644
>>> --- a/drivers/misc/eeprom/eeprom_93xx46.c
>>> +++ b/drivers/misc/eeprom/eeprom_93xx46.c
>>> @@ -13,6 +13,8 @@
>>> #include <linux/kernel.h>
>>> #include <linux/module.h>
>>> #include <linux/mutex.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>> #include <linux/slab.h>
>>> #include <linux/spi/spi.h>
>>> #include <linux/sysfs.h>
>>> @@ -294,12 +296,71 @@ static ssize_t eeprom_93xx46_store_erase(struct
>>> device *dev,
>>> }
>>> static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
>>>
>>> +#ifdef CONFIG_OF
>>> +static const struct of_device_id eeprom_93xx46_of_table[] = {
>>> + { .compatible = "eeprom-93xx46", },
>>> + {}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
>>> +
>>
>> Please move this declaration closer to struct spi_driver
>> eeprom_93xx46_driver below.
>
> As Andrew noted in his follow-up, it's used in the function immediately
> after this declaration. Seems logical to leave it here?
IMO no, see my comment below.
>> Also you can avoid #ifdef here, if you write
>>
>> .of_match_table = of_match_ptr(eeprom_93xx46_of_table)
>
> Will change this to use of_match_ptr().
>
>> Whenever possible please avoid #ifdef's in .c files.
>
> Agreed. #ifdef CONFIG_OF still seems to be fairly pervasive though...?
>
In my opinion it is better to avoid it, and many nice drivers don't have
#ifdef CONFIG_OF.
>>> +static int eeprom_93xx46_probe_dt(struct spi_device *spi)
>>> +{
>>> + struct device_node *np = spi->dev.of_node;
>>> + struct eeprom_93xx46_platform_data *pd;
>>> + u32 tmp;
>>> + int ret;
>>> +
>>> + if (!of_match_device(eeprom_93xx46_of_table, &spi->dev))
>>> + return 0;
This check above is redundant, please remove it.
Imagine, how can you get here !of_match_device(..) condition, if you
have driver initialization from a valid device node?
>>> +
>>> + pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL);
>>> + if (!pd)
>>> + return -ENOMEM;
>>> +
>>> + ret = of_property_read_u32(np, "data-size", &tmp);
>>> + if (ret < 0) {
>>> + dev_err(&spi->dev, "data-size property not found\n");
>>> + goto error_free;
>>
>> Because you use devm_* resource allocation in .probe, just return error.
>
> Will fix.
>
>> Plus I would suggest to change "data-size" property to an optional one,
>> here I mean that if it is omitted, then by default consider pd->flags |=
>> EE_ADDR8.
>
> I don't see such an assumption as safe...data word size is an inherent
> property of the device (or the way it's strapped on a given platform),
> and should be required for proper operation.
>
Ok.
>>> + }
>>> +
>>> + if (tmp == 8) {
>>> + pd->flags |= EE_ADDR8;
>>> + } else if (tmp == 16) {
>>> + pd->flags |= EE_ADDR16;
>>> + } else {
>>> + dev_err(&spi->dev, "invalid data-size (%d)\n", tmp);
>>> + goto error_free;
>>
>> Same here.
>
> Will fix.
>
>>> + }
>>> +
>>> + if (of_property_read_bool(np, "read-only"))
>>> + pd->flags |= EE_READONLY;
>>> +
>>> + spi->dev.platform_data = pd;
>>> +
>>> + return 1;
>>
>> On success please return 0.
>
> Fixed.
>
>>> +error_free:
>>> + devm_kfree(&spi->dev, pd);
>>> + return ret;
>>> +}
>>> +
>>> +#else
>>> +static inline int eeprom_93xx46_probe_dt(struct spi_device *spi)
>>> +{
>>> + return 0;
>>> +}
>>> +#endif
>>> +
>>
>> I actually don't see a point to have #ifdef CONFIG_OF here.
>>
>> Instead please add a check for !spi->dev.of_node at the beginning of
>> eeprom_93xx46_probe_dt() or in .probe()
>
> How about...
>
> if (IS_ENABLED(CONFIG_OF) && spi->dev.of_node) {
> err = eeprom_93xx46_probe_dt(spi);
> if (err < 0)
> return err;
> }
>
> ...at the beginning of eeprom_93xx46_probe() (as below)?
>
if (spi->dev.of_node) {
err = eeprom_93xx46_probe_dt(spi);
if (err < 0)
return err;
}
is good enough.
Condition (!IS_ENABLED(CONFIG_OF) && spi->dev.of_node) is always false.
>>> static int eeprom_93xx46_probe(struct spi_device *spi)
>>> {
>>> struct eeprom_93xx46_platform_data *pd;
>>> struct eeprom_93xx46_dev *edev;
>>> int err;
>>>
>>> + err = eeprom_93xx46_probe_dt(spi);
>>> + if (err < 0)
>>> + return err;
>>> +
>>> pd = spi->dev.platform_data;
>>> if (!pd) {
>>> dev_err(&spi->dev, "missing platform data\n");
>>> @@ -370,6 +431,7 @@ static int eeprom_93xx46_remove(struct spi_device *spi)
>>> static struct spi_driver eeprom_93xx46_driver = {
>>> .driver = {
>>> .name = "93xx46",
>>> + .of_match_table = eeprom_93xx46_of_table,
>>> },
>>> .probe = eeprom_93xx46_probe,
>>> .remove = eeprom_93xx46_remove,
>>>
>
>
--
With best wishes,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
