I've got the p5B-E board to with the onboard attansic l1.
I did the the atl1-2.0.2 patch against the 2.6.19.rc6 kernel. I can confirm the card is working but performance is *really* bad, 200Kb/s over Gbit LAN. I tried copying a ~50MB file over SSH and it didn't complete because of a connection stall. I also tried turninig off TSO as adviced, but i got the message "operation not supported". Im willing to do more testing, just tell me what I can do. Greetings Vasco Jay Cliburn wrote: > > Luca Tettamanti wrote: > >> Got the board, done some basic testing: so far so good :) >> >> The controller also supports MSI and (at least with my chipset - G965) >> it works fine: >> >> 218: 80649 0 PCI-MSI-edge eth1 >> >> which is nice, otherwise it ends up sharing the IRQ with SATA and USB. >> >> I also have a small patch: > > Thanks for the patch. We'll add it for the next version. > > FYI, TSO performance is _really_ bad; your tx speed will drop dramatically > with > TSO on (and it's on by default). I haven't yet been able to find the > problem. > If you want to improve tx performance, turn off TSO with ethtool. > > Jay > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > -- View this message in context: http://www.nabble.com/-PATCH-0-4--atl1%3A-Revised-Attansic-L1-ethernet-driver-tf2665327.html#a7768448 Sent from the linux-kernel mailing list archive at Nabble.com. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
