On 11/23/2015 02:07 AM, Huang Rui wrote:
For SB800 and later chipsets, the register definitions are the same
with SB800. And for SB700 and older chipsets, the definitions should
be same with SP5100/SB7x0.
Signed-off-by: Huang Rui <ray.hu...@amd.com>
Cc: Denis Turischev <denis.turisc...@compulab.co.il>
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Would it make sense to rework this driver as pci driver ?
Thanks,
Guenter
---
Hi Guenter,
These two patches should be on top of "sp5100_tco: Add AMD Mullins
platform support". And are rebased at watchdog-next branch.
Thanks,
Rui
---
drivers/watchdog/sp5100_tco.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index ef039f8..c9dd419 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -333,21 +333,24 @@ static unsigned char sp5100_tco_setupdevice(void)
if (!sp5100_tco_pci)
return 0;
- pr_info("PCI Revision ID: 0x%x\n", sp5100_tco_pci->revision);
+ pr_info("PCI Vendor ID: 0x%x, Device ID: 0x%x, Revision ID: 0x%x\n",
+ sp5100_tco_pci->vendor, sp5100_tco_pci->device,
+ sp5100_tco_pci->revision);
/*
* Determine type of southbridge chipset.
*/
- if (sp5100_tco_pci->revision >= 0x40) {
- dev_name = SB800_DEVNAME;
- index_reg = SB800_IO_PM_INDEX_REG;
- data_reg = SB800_IO_PM_DATA_REG;
- base_addr = SB800_PM_WATCHDOG_BASE;
- } else {
+ if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+ sp5100_tco_pci->revision < 0x40) {
dev_name = SP5100_DEVNAME;
index_reg = SP5100_IO_PM_INDEX_REG;
data_reg = SP5100_IO_PM_DATA_REG;
base_addr = SP5100_PM_WATCHDOG_BASE;
+ } else {
+ dev_name = SB800_DEVNAME;
+ index_reg = SB800_IO_PM_INDEX_REG;
+ data_reg = SB800_IO_PM_DATA_REG;
+ base_addr = SB800_PM_WATCHDOG_BASE;
}
/* Request the IO ports used by this driver */
@@ -383,7 +386,12 @@ static unsigned char sp5100_tco_setupdevice(void)
* Secondly, Find the watchdog timer MMIO address
* from SBResource_MMIO register.
*/
- if (sp5100_tco_pci->revision >= 0x40) {
+ if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+ sp5100_tco_pci->revision < 0x40) {
+ /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
+ pci_read_config_dword(sp5100_tco_pci,
+ SP5100_SB_RESOURCE_MMIO_BASE, &val);
+ } else {
/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG);
val = inb(SB800_IO_PM_DATA_REG);
@@ -393,10 +401,6 @@ static unsigned char sp5100_tco_setupdevice(void)
val = val << 8 | inb(SB800_IO_PM_DATA_REG);
outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG);
val = val << 8 | inb(SB800_IO_PM_DATA_REG);
- } else {
- /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
- pci_read_config_dword(sp5100_tco_pci,
- SP5100_SB_RESOURCE_MMIO_BASE, &val);
}
/* The SBResource_MMIO is enabled and mapped memory space? */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
