On Tue, Nov 24, 2015 at 05:21:30PM -0600, Rob Herring wrote:
> On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> > ESAI need to enable the spba clock, when sdma is using share peripheral
> > script. In this case, there is two spba master port is used, if don't
> > enable the clock, the spba bus will have arbitration issue, which may
> > cause read/write wrong data from/to ESAI registers.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.w...@freescale.com>
> > ---
> > Documentation/devicetree/bindings/sound/fsl,esai.txt | 5 +++++
>
> Acked-by: Rob Herring <r...@kernel.org>
Hi Mark, Rob
Just a reminder. There is V4 for this patch set. I think the "Acked-by:" is
for the V4. Thanks.
best regards
wang shengjiu
>
> > sound/soc/fsl/fsl_esai.c | 13 +++++++++++++
> > 2 files changed, 18 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > index d3b6b5f..cd3ee5d 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > @@ -27,6 +27,11 @@ Required properties:
> > derive HCK, SCK and FS.
> > "fsys" The system clock derived from ahb clock used to
> > derive HCK, SCK and FS.
> > + "spba" The spba clock is required when ESAI is placed as a
> > + bus slave of the Shared Peripheral Bus and when two
> > + or more bus masters (CPU, DMA or DSP) try to access
> > + it. This property is optional depending on the SoC
> > + design.
> >
> > - fsl,fifo-depth : The number of elements in the transmit and receive
> > FIFOs. This number is the maximum allowed value for
> > diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> > index 504e731..4d7589c 100644
> > --- a/sound/soc/fsl/fsl_esai.c
> > +++ b/sound/soc/fsl/fsl_esai.c
> > @@ -35,6 +35,7 @@
> > * @coreclk: clock source to access register
> > * @extalclk: esai clock source to derive HCK, SCK and FS
> > * @fsysclk: system clock source to derive HCK, SCK and FS
> > + * @spbaclk: SPBA clock (optional, depending on SoC design)
> > * @fifo_depth: depth of tx/rx FIFO
> > * @slot_width: width of each DAI slot
> > * @slots: number of slots
> > @@ -54,6 +55,7 @@ struct fsl_esai {
> > struct clk *coreclk;
> > struct clk *extalclk;
> > struct clk *fsysclk;
> > + struct clk *spbaclk;
> > u32 fifo_depth;
> > u32 slot_width;
> > u32 slots;
> > @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream
> > *substream,
> > ret = clk_prepare_enable(esai_priv->coreclk);
> > if (ret)
> > return ret;
> > + ret = clk_prepare_enable(esai_priv->spbaclk);
> > + if (ret)
> > + goto err_spbaclk;
> > if (!IS_ERR(esai_priv->extalclk)) {
> > ret = clk_prepare_enable(esai_priv->extalclk);
> > if (ret)
> > @@ -499,6 +504,8 @@ err_fsysclk:
> > if (!IS_ERR(esai_priv->extalclk))
> > clk_disable_unprepare(esai_priv->extalclk);
> > err_extalck:
> > + clk_disable_unprepare(esai_priv->spbaclk);
> > +err_spbaclk:
> > clk_disable_unprepare(esai_priv->coreclk);
> >
> > return ret;
> > @@ -564,6 +571,7 @@ static void fsl_esai_shutdown(struct snd_pcm_substream
> > *substream,
> > clk_disable_unprepare(esai_priv->fsysclk);
> > if (!IS_ERR(esai_priv->extalclk))
> > clk_disable_unprepare(esai_priv->extalclk);
> > + clk_disable_unprepare(esai_priv->spbaclk);
> > clk_disable_unprepare(esai_priv->coreclk);
> > }
> >
> > @@ -819,6 +827,11 @@ static int fsl_esai_probe(struct platform_device *pdev)
> > dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n",
> > PTR_ERR(esai_priv->fsysclk));
> >
> > + esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
> > + if (IS_ERR(esai_priv->spbaclk))
> > + dev_warn(&pdev->dev, "failed to get spba clock: %ld\n",
> > + PTR_ERR(esai_priv->spbaclk));
> > +
> > irq = platform_get_irq(pdev, 0);
> > if (irq < 0) {
> > dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
> > --
> > 1.9.1
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
