On Sat, 9 Dec 2006 16:28:59 +0100 Norbert Preining wrote: > Hi all! > > [Please Cc] > > I copied my old config-2.6.19-rc4 to a clean linux-2.6.19 tree, called > make oldconfig; make, installed the kernel and modules, but the kernel > cannot find the root file system. > > I diffed the two config files and the only not-comment diff is: > -# CONFIG_SYSCTL_SYSCALL is not set > +CONFIG_SYSCTL_SYSCALL=y > (how did this happen?)
The default changed from n to y. > a part of the dmesg is included here (from -rc4): > > libata version 2.00 loaded. > ata_piix 0000:00:1f.2: version 2.00ac6 > ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 > ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 > scsi0 : ata_piix > PM: Adding info for No Bus:host0 > ata1.00: ATA-7, max UDMA/133, 195371568 sectors: LBA48 NCQ (depth 0/32) > ata1.00: ata1: dev 0 multi count 16 > ata1.00: configured for UDMA/133 > scsi1 : ata_piix That didn't help (me). > Hardware: Acer TravelMate 3012 > > > Any suggestions what to do next? Test 2.6.19-rc5, 2.6.19-rc6, and then use git snapshots or git bisect to focus in on the breakage. And post more complete boot logs. --- ~Randy - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/