Hi Hans,
On jeu., déc. 10 2015, Andrew Lunn <and...@lunn.ch> wrote:
> On Thu, Dec 10, 2015 at 06:33:08AM +0100, Hans Ulli Kroll wrote:
>> Add a new DTS file to support the Zyxel NSA325(v2) dual bay
>> NAS device, based on the NSA320 DTS files.
>>
>> The only difference to the NSA320 device is GPIO47.
>> This en/disables the power for the hdd in slot2, currently
>> fixed to on.
>>
>> Signed-off-by: Hans Ulli Kroll <ulli.kr...@googlemail.com>
>
> Looks good. Thanks
>
> Acked-by: Andrew Lunn <and...@lunn.ch>
Applied on mvebu/dt with Andrew's acked-by and minor fix on comment
format.
Thanks,
Gregory
>
> Andrew
>
>> ---
>>
>> v2
>> - using kirkwood-nsa325.dts as template, this removes the odd
>> indentation and unneeded partitions nodes.
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/kirkwood-nsa325.dts | 236
>> ++++++++++++++++++++++++++++++++++
>> 2 files changed, 237 insertions(+)
>> create mode 100644 arch/arm/boot/dts/kirkwood-nsa325.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index bb8fa02..0fcae90 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -193,6 +193,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
>> kirkwood-ns2mini.dtb \
>> kirkwood-nsa310.dtb \
>> kirkwood-nsa310a.dtb \
>> + kirkwood-nsa325.dtb \
>> kirkwood-openblocks_a6.dtb \
>> kirkwood-openblocks_a7.dtb \
>> kirkwood-openrd-base.dtb \
>> diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts
>> b/arch/arm/boot/dts/kirkwood-nsa325.dts
>> new file mode 100644
>> index 0000000..6e9ffb5
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
>> @@ -0,0 +1,236 @@
>> +/* Device tree file for the Zyxel NSA 325 NAS box.
>> + *
>> + * Copyright (c) 2015, Hans Ulli Kroll <ulli.kr...@googlemail.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation; either version
>> + * 2 of the License, or (at your option) any later version.
>> + *
>> + * Based upon the board setup file created by Peter Schildmann */
>> +
>> +/dts-v1/;
>> +
>> +#include "kirkwood-nsa3x0-common.dtsi"
>> +
>> +/ {
>> + model = "ZyXEL NSA325";
>> + compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282",
>> "marvell,kirkwood";
>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0x00000000 0x20000000>;
>> + };
>> +
>> + chosen {
>> + bootargs = "console=ttyS0,115200";
>> + stdout-path = &uart0;
>> + };
>> +
>> + mbus {
>> + pcie-controller {
>> + status = "okay";
>> +
>> + pcie@1,0 {
>> + status = "okay";
>> + };
>> + };
>> + };
>> +
>> + ocp@f1000000 {
>> + pinctrl: pin-controller@10000 {
>> + pinctrl-names = "default";
>> +
>> + pmx_led_hdd2_green: pmx-led-hdd2-green {
>> + marvell,pins = "mpp12";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_led_hdd2_red: pmx-led-hdd2-red {
>> + marvell,pins = "mpp13";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_mcu_data: pmx-mcu-data {
>> + marvell,pins = "mpp14";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_led_usb_green: pmx-led-usb-green {
>> + marvell,pins = "mpp15";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_mcu_clk: pmx-mcu-clk {
>> + marvell,pins = "mpp16";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_mcu_act: pmx-mcu-act {
>> + marvell,pins = "mpp17";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_led_sys_green: pmx-led-sys-green {
>> + marvell,pins = "mpp28";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_led_sys_orange: pmx-led-sys-orange {
>> + marvell,pins = "mpp29";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_led_hdd1_green: pmx-led-hdd1-green {
>> + marvell,pins = "mpp41";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_led_hdd1_red: pmx-led-hdd1-red {
>> + marvell,pins = "mpp42";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_htp: pmx-htp {
>> + marvell,pins = "mpp43";
>> + marvell,function = "gpio";
>> + };
>> +
>> + /* Buzzer needs to be switched at around 1kHz so is
>> + not compatible with the gpio-beeper driver. */
>> + pmx_buzzer: pmx-buzzer {
>> + marvell,pins = "mpp44";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_vid_b1: pmx-vid-b1 {
>> + marvell,pins = "mpp45";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_power_resume_data: pmx-power-resume-data {
>> + marvell,pins = "mpp47";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_power_resume_clk: pmx-power-resume-clk {
>> + marvell,pins = "mpp49";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_pwr_sata1: pmx-pwr-sata1 {
>> + marvell,pins = "mpp47";
>> + marvell,function = "gpio";
>> + };
>> + };
>> +
>> + /* This board uses the pcf8563 RTC instead of the SoC RTC */
>> + rtc@10300 {
>> + status = "disabled";
>> + };
>> +
>> + i2c@11000 {
>> + status = "okay";
>> +
>> + pcf8563: pcf8563@51 {
>> + compatible = "nxp,pcf8563";
>> + reg = <0x51>;
>> + };
>> + };
>> + };
>> +
>> + regulators {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-0 = <&pmx_pwr_sata1>;
>> + pinctrl-names = "default";
>> +
>> + usb0_power: regulator@1 {
>> + enable-active-high;
>> + };
>> +
>> + sata1_power: regulator@2 {
>> + compatible = "regulator-fixed";
>> + reg = <2>;
>> + regulator-name = "SATA1 Power";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + enable-active-high;
>> + gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
>> + };
>> + };
>> +
>> + gpio-leds {
>> + compatible = "gpio-leds";
>> + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
>> + &pmx_led_usb_green
>> + &pmx_led_sys_green &pmx_led_sys_orange
>> + &pmx_led_copy_green &pmx_led_copy_red
>> + &pmx_led_hdd1_green &pmx_led_hdd1_red>;
>> + pinctrl-names = "default";
>> +
>> + green-sys {
>> + label = "nsa325:green:sys";
>> + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
>> + };
>> + orange-sys {
>> + label = "nsa325:orange:sys";
>> + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
>> + };
>> + green-hdd1 {
>> + label = "nsa325:green:hdd1";
>> + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
>> + };
>> + red-hdd1 {
>> + label = "nsa325:red:hdd1";
>> + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
>> + };
>> + green-hdd2 {
>> + label = "nsa325:green:hdd2";
>> + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
>> + };
>> + red-hdd2 {
>> + label = "nsa325:red:hdd2";
>> + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
>> + };
>> + green-usb {
>> + label = "nsa325:green:usb";
>> + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
>> + };
>> + green-copy {
>> + label = "nsa325:green:copy";
>> + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
>> + };
>> + red-copy {
>> + label = "nsa325:red:copy";
>> + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> + /* The following pins are currently not assigned to a driver,
>> + some of them should be configured as inputs.
>> + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
>> + &pmx_htp &pmx_vid_b1
>> + &pmx_power_resume_data &pmx_power_resume_clk>; */
>> +
>> + };
>> +
>> +
>> +};
>> +
>> +&mdio {
>> + status = "okay";
>> + ethphy0: ethernet-phy@1 {
>> + reg = <1>;
>> + };
>> +};
>> +
>> +ð0 {
>> + status = "okay";
>> + ethernet0-port@0 {
>> + phy-handle = <ðphy0>;
>> + };
>> +};
>> +
>> --
>> 2.6.0
>>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
