Instead of one defconfig file per board, pxa27x-dt_defconfig is expected to provide a configuration for kernel which can test any PXA27X-DT compatible board
Signed-off-by: Sergei Ianovich <ynv...@gmail.com> CC: Robert Jarzmik <robert.jarz...@free.fr> CC: Arnd Bergmann <a...@arndb.de> --- Documentation/arm/pxa/pxa27x_defconfig.txt | 7 ++ arch/arm/configs/pxa27x-dt_defconfig | 102 +++++++++++++++++++++++++++++ 2 files changed, 109 insertions(+) create mode 100644 Documentation/arm/pxa/pxa27x_defconfig.txt create mode 100644 arch/arm/configs/pxa27x-dt_defconfig diff --git a/Documentation/arm/pxa/pxa27x_defconfig.txt b/Documentation/arm/pxa/pxa27x_defconfig.txt new file mode 100644 index 0000000..fc4e164 --- /dev/null +++ b/Documentation/arm/pxa/pxa27x_defconfig.txt @@ -0,0 +1,7 @@ +If you are reading this, because you are adding support for a new +PXA27X board, please note that you should not create an additional +defconfig in arch/arm/configs. + +Instead, please update arch/arm/configs/pxa27x-dt_defconfig so that +a kernel built with this config after `make olddefconfig` boots your +board. diff --git a/arch/arm/configs/pxa27x-dt_defconfig b/arch/arm/configs/pxa27x-dt_defconfig new file mode 100644 index 0000000..003be48 --- /dev/null +++ b/arch/arm/configs/pxa27x-dt_defconfig @@ -0,0 +1,102 @@ +## Kernel built with this config should boot any supported PXA27X-DT board +## Please see Documentation/arm/pxa/pxa27x_defconfig.txt for details +## +CONFIG_ARM=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_BLK_CMDLINE_PARSER=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_PXA=y +CONFIG_MACH_PXA27X_DT=y +CONFIG_PXA_SYSTEMS_CPLDS=y +CONFIG_PXA_SSP=y +CONFIG_CPU_FREQ=y +CONFIG_ARM_PXA2xx_CPUFREQ=y +CONFIG_NET=y +CONFIG_IRDA=y +CONFIG_PXA_FICP=y +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PXA2XX=y +CONFIG_OF=y +CONFIG_OF_FLATTREE=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +CONFIG_ATA_BMDMA=y +CONFIG_PATA_PXA=y +CONFIG_NETDEVICES=y +CONFIG_DM9000=y +CONFIG_INPUT=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_PXA27x=y +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_NAVPOINT_PXA27x=y +CONFIG_TTY=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=40 +CONFIG_SERIAL_8250_RUNTIME_UARTS=40 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_PXA=y +CONFIG_I2C=y +CONFIG_I2C_GPIO=y +CONFIG_I2C_PXA=y +CONFIG_SPI=y +CONFIG_SPI_PXA2XX=y +CONFIG_WATCHDOG=y +CONFIG_SA1100_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_VIDEO_DEV=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_VIDEO_PXA27x=y +CONFIG_FB=y +CONFIG_FB_PXA=y +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_SMARTPANEL=y +CONFIG_FB_PXA_PARAMETERS=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_AC97=y +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_USB_SUPPORT=y +CONFIG_USB=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PXA27X=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PXA=y +CONFIG_DMADEVICES=y +CONFIG_DMA_OF=y +CONFIG_PXA_DMA=y +CONFIG_PWM=y +CONFIG_PWM_PXA=y +CONFIG_EXT4_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y -- 2.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
