Some NCR5380 hosts offer a .show_info method to access the contents of
the various command list data structures from a procfs file. When NDEBUG
is set, the same information is sent to the console during EH.
The two core drivers, atari_NCR5380.c and NCR5380.c differ here. Because
it is just for debugging, the easiest way to fix the discrepancy is
simply remove this code.
The only remaining users of NCR5380_show_info() and NCR5380_write_info()
are drivers that define PSEUDO_DMA. The others have no use for the
.show_info method, so don't initialize it.
Signed-off-by: Finn Thain <fth...@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <h...@suse.com>
Tested-by: Ondrej Zary <li...@rainbow-software.org>
Tested-by: Michael Schmitz <schmitz...@gmail.com>
---
drivers/scsi/NCR5380.c | 70 ++------------------------------
drivers/scsi/arm/oak.c | 2
drivers/scsi/atari_NCR5380.c | 94 +------------------------------------------
drivers/scsi/atari_scsi.c | 2
drivers/scsi/g_NCR5380.c | 1
drivers/scsi/sun3_scsi.c | 2
6 files changed, 9 insertions(+), 162 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:09.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:12.000000000 +1100
@@ -558,22 +558,6 @@ static void prepare_info(struct Scsi_Hos
"");
}
-/**
- * NCR5380_print_status - dump controller info
- * @instance: controller to dump
- *
- * Print commands in the various queues, called from NCR5380_abort
- * and NCR5380_debug to aid debugging.
- *
- * Locks: called functions disable irqs
- */
-
-static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance)
-{
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_dprint_phase(NDEBUG_ANY, instance);
-}
-
#ifdef PSEUDO_DMA
/******************************************/
/*
@@ -598,65 +582,19 @@ static int __maybe_unused NCR5380_write_
hostdata->spin_max_w = 0;
return 0;
}
-#endif
-
-static
-void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m);
-static
-void lprint_command(unsigned char *cmd, struct seq_file *m);
-static
-void lprint_opcode(int opcode, struct seq_file *m);
static int __maybe_unused NCR5380_show_info(struct seq_file *m,
struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
- unsigned long flags;
hostdata = (struct NCR5380_hostdata *) instance->hostdata;
-#ifdef PSEUDO_DMA
seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
hostdata->spin_max_w, hostdata->spin_max_r);
-#endif
- spin_lock_irqsave(&hostdata->lock, flags);
- if (!hostdata->connected)
- seq_printf(m, "scsi%d: no currently connected command\n",
instance->host_no);
- else
- lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
- seq_printf(m, "scsi%d: issue_queue\n", instance->host_no);
- for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr =
(struct scsi_cmnd *) ptr->host_scribble)
- lprint_Scsi_Cmnd(ptr, m);
-
- seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr
= (struct scsi_cmnd *) ptr->host_scribble)
- lprint_Scsi_Cmnd(ptr, m);
- spin_unlock_irqrestore(&hostdata->lock, flags);
return 0;
}
-
-static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
-{
- seq_printf(m, "scsi%d : destination target %d, lun %llu\n",
cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
- seq_puts(m, " command = ");
- lprint_command(cmd->cmnd, m);
-}
-
-static void lprint_command(unsigned char *command, struct seq_file *m)
-{
- int i, s;
- lprint_opcode(command[0], m);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- seq_printf(m, "%02x ", command[i]);
- seq_putc(m, '\n');
-}
-
-static void lprint_opcode(int opcode, struct seq_file *m)
-{
- seq_printf(m, "%2d (0x%02x)", opcode, opcode);
-}
-
+#endif
/**
* NCR5380_init - initialise an NCR5380
@@ -2335,7 +2273,8 @@ static int NCR5380_abort(struct scsi_cmn
spin_lock_irqsave(&hostdata->lock, flags);
- NCR5380_print_status(instance);
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no);
dprintk(NDEBUG_ABORT, " basr 0x%X, sr 0x%X\n",
NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG));
@@ -2490,8 +2429,9 @@ static int NCR5380_bus_reset(struct scsi
#if (NDEBUG & NDEBUG_ANY)
scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
- NCR5380_print_status(instance);
#endif
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
do_reset(instance);
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:09.000000000
+1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:12.000000000 +1100
@@ -657,94 +657,6 @@ static void prepare_info(struct Scsi_Hos
}
/**
- * NCR5380_print_status - dump controller info
- * @instance: controller to dump
- *
- * Print commands in the various queues, called from NCR5380_abort
- * to aid debugging.
- */
-
-static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd)
-{
- int i, s;
- unsigned char *command;
- printk("scsi%d: destination target %d, lun %llu\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- printk(KERN_CONT " command = ");
- command = cmd->cmnd;
- printk(KERN_CONT "%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- printk(KERN_CONT " %02x", command[i]);
- printk("\n");
-}
-
-static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
-
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_dprint_phase(NDEBUG_ANY, instance);
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- if (!hostdata->connected)
- printk("scsi%d: no currently connected command\n", HOSTNO);
- else
- lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected);
- printk("scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr =
NEXT(ptr))
- lprint_Scsi_Cmnd(ptr);
-
- printk("scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr))
- lprint_Scsi_Cmnd(ptr);
- printk("\n");
-}
-
-static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
-{
- int i, s;
- unsigned char *command;
- seq_printf(m, "scsi%d: destination target %d, lun %llu\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- seq_puts(m, " command = ");
- command = cmd->cmnd;
- seq_printf(m, "%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- seq_printf(m, " %02x", command[i]);
- seq_putc(m, '\n');
-}
-
-static int __maybe_unused NCR5380_show_info(struct seq_file *m,
- struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
- unsigned long flags;
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- spin_lock_irqsave(&hostdata->lock, flags);
- if (!hostdata->connected)
- seq_printf(m, "scsi%d: no currently connected command\n",
HOSTNO);
- else
- show_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
- seq_printf(m, "scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr =
NEXT(ptr))
- show_Scsi_Cmnd(ptr, m);
-
- seq_printf(m, "scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr))
- show_Scsi_Cmnd(ptr, m);
-
- spin_unlock_irqrestore(&hostdata->lock, flags);
- return 0;
-}
-
-/**
* NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
* @flags: control flags
@@ -2617,7 +2529,8 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
spin_lock_irqsave(&hostdata->lock, flags);
- NCR5380_print_status(instance);
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n",
HOSTNO,
NCR5380_read(BUS_AND_STATUS_REG),
@@ -2815,8 +2728,9 @@ static int NCR5380_bus_reset(struct scsi
#if (NDEBUG & NDEBUG_ANY)
scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
- NCR5380_print_status(instance);
#endif
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
do_reset(instance);
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:04:12.000000000 +1100
@@ -28,7 +28,6 @@
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
-#define NCR5380_show_info oakscsi_show_info
#define NCR5380_implementation_fields \
void __iomem *base
@@ -104,7 +103,6 @@ printk("reading %p len %d\n", addr, len)
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
- .show_info = oakscsi_show_info,
.name = "Oak 16-bit SCSI",
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:04:03.000000000
+1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:04:12.000000000 +1100
@@ -97,7 +97,6 @@
#define NCR5380_queue_command atari_scsi_queue_command
#define NCR5380_abort atari_scsi_abort
-#define NCR5380_show_info atari_scsi_show_info
#define NCR5380_info atari_scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
@@ -774,7 +773,6 @@ static int atari_scsi_bus_reset(struct s
static struct scsi_host_template atari_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = atari_scsi_show_info,
.name = "Atari native SCSI",
.info = atari_scsi_info,
.queuecommand = atari_scsi_queue_command,
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:08.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:12.000000000 +1100
@@ -715,7 +715,6 @@ static int generic_NCR5380_dma_xfer_len(
static struct scsi_host_template driver_template = {
.proc_name = DRV_MODULE_NAME,
- .show_info = generic_NCR5380_show_info,
.name = "Generic NCR5380/NCR53C400 SCSI",
.detect = generic_NCR5380_detect,
.release = generic_NCR5380_release_resources,
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:12.000000000 +1100
@@ -53,7 +53,6 @@
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
-#define NCR5380_show_info sun3scsi_show_info
#define NCR5380_info sun3scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
@@ -459,7 +458,6 @@ static int sun3scsi_dma_finish(int write
static struct scsi_host_template sun3_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = sun3scsi_show_info,
.name = SUN3_SCSI_NAME,
.info = sun3scsi_info,
.queuecommand = sun3scsi_queue_command,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
