Hi, >> The current driver uses input clock source frequency to calculate >> values for [SS|FS]_[HC|LC] registers. However, when booting ACPI, we do not >> currently have a good way to provide the frequency information. >> Instead, we can leverage the SSCN and FFCN ACPI methods, which can be used >> to directly provide these values. So, the clock information should >> no longer be required during probing. >> >> However, since clk can be invalid, additional checks must be done where >> we are making use of it. >> >> Signed-off-by: Mika Westerberg <mika.westerb...@linux.intel.com> >> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpa...@amd.com> >> Tested-by: Loc Ho <l...@apm.com> >> --- >> >> Note: This has been tested on AMD Seattle RevB for both DT and ACPI. >> >> Changes from V3 (https://lkml.org/lkml/2015/12/22/596): >> * Add i2c_dw_plat_prepare_clk() per Andy's suggestion >> * Add tested-by Loc Ho. > > The changes from V3 are big enough that I'd appreciate a new Tested-by > tag. >
Will let you know when I have moment to give this a try on X-Gene. -Loc -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
