Since the related driver (CPG/MSSR driver) only manages the first module
clock, this driver should not handle the HSUSB registers. So, this patch
removes the HSUSB registers handling.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
This patch is based on the linux-phy / next branch.
(commit id = 9955a7835bf376e12482583958b2661f501b868b)
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 15 ++--
drivers/phy/phy-rcar-gen3-usb2.c | 83 +++-------------------
2 files changed, 15 insertions(+), 83 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index 2390e4e..eaf7e9b 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -7,33 +7,26 @@ Required properties:
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
- reg: offset and length of the partial USB 2.0 Host register block.
-- reg-names: must be "usb2_host".
- clocks: clock phandle and specifier pair(s).
- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
Optional properties:
To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set HSUSB properties to reg and reg-names
-properties. This is because HSUSB has registers to select USB 2.0 host or
-peripheral at that channel:
-- reg: offset and length of the partial HSUSB register block.
-- reg-names: must be "hsusb".
+combined, the device tree node should set interrupt properties to use the
+channel as USB OTG:
- interrupts: interrupt specifier for the PHY.
Example (R-Car H3):
usb-phy@ee080200 {
compatible = "renesas,usb2-phy-r8a7795";
- reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
- reg-names = "usb2_host", "hsusb";
+ reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
- <&mstp7_clks R8A7795_CLK_HSUSB>;
+ clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
};
usb-phy@ee0a0200 {
compatible = "renesas,usb2-phy-r8a7795";
reg = <0 0xee0a0200 0 0x700>;
- reg-names = "usb2_host";
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
};
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index ef332ef..bc4f7dd 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -74,20 +74,6 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
-/******* HSUSB registers (original offset is +0x100) *******/
-#define HSUSB_LPSTS 0x02
-#define HSUSB_UGCTRL2 0x84
-
-/* Low Power Status register (LPSTS) */
-#define HSUSB_LPSTS_SUSPM 0x4000
-
-/* USB General control register 2 (UGCTRL2) */
-#define HSUSB_UGCTRL2_MASK 0x00000031 /* bit[31:6] should be 0 */
-#define HSUSB_UGCTRL2_USB0SEL 0x00000030
-#define HSUSB_UGCTRL2_USB0SEL_HOST 0x00000010
-#define HSUSB_UGCTRL2_USB0SEL_HS_USB 0x00000020
-#define HSUSB_UGCTRL2_USB0SEL_OTG 0x00000030
-
struct rcar_gen3_data {
void __iomem *base;
struct clk *clk;
@@ -95,8 +81,8 @@ struct rcar_gen3_data {
struct rcar_gen3_chan {
struct rcar_gen3_data usb2;
- struct rcar_gen3_data hsusb;
struct phy *phy;
+ bool has_otg;
};
static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
@@ -202,24 +188,15 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *usb2_base = channel->usb2.base;
- void __iomem *hsusb_base = channel->hsusb.base;
- u32 val;
/* Initialize USB2 part */
writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
- /* Initialize HSUSB part */
- if (hsusb_base) {
- val = readl(hsusb_base + HSUSB_UGCTRL2);
- val = (val & ~HSUSB_UGCTRL2_USB0SEL) |
- HSUSB_UGCTRL2_USB0SEL_OTG;
- writel(val & HSUSB_UGCTRL2_MASK, hsusb_base + HSUSB_UGCTRL2);
-
- /* Initialize otg part */
+ /* Initialize otg part */
+ if (channel->has_otg)
rcar_gen3_init_otg(channel);
- }
return 0;
}
@@ -237,7 +214,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *usb2_base = channel->usb2.base;
- void __iomem *hsusb_base = channel->hsusb.base;
u32 val;
val = readl(usb2_base + USB2_USBCTR);
@@ -246,33 +222,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
val &= ~USB2_USBCTR_PLL_RST;
writel(val, usb2_base + USB2_USBCTR);
- /*
- * TODO: To reduce power consuming, this driver should set the SUSPM
- * after the PHY detects ID pin as peripheral.
- */
- if (hsusb_base) {
- /* Power on HSUSB PHY */
- val = readw(hsusb_base + HSUSB_LPSTS);
- val |= HSUSB_LPSTS_SUSPM;
- writew(val, hsusb_base + HSUSB_LPSTS);
- }
-
- return 0;
-}
-
-static int rcar_gen3_phy_usb2_power_off(struct phy *p)
-{
- struct rcar_gen3_chan *channel = phy_get_drvdata(p);
- void __iomem *hsusb_base = channel->hsusb.base;
- u32 val;
-
- if (hsusb_base) {
- /* Power off HSUSB PHY */
- val = readw(hsusb_base + HSUSB_LPSTS);
- val &= ~HSUSB_LPSTS_SUSPM;
- writew(val, hsusb_base + HSUSB_LPSTS);
- }
-
return 0;
}
@@ -280,7 +229,6 @@ static struct phy_ops rcar_gen3_phy_usb2_ops = {
.init = rcar_gen3_phy_usb2_init,
.exit = rcar_gen3_phy_usb2_exit,
.power_on = rcar_gen3_phy_usb2_power_on,
- .power_off = rcar_gen3_phy_usb2_power_off,
.owner = THIS_MODULE,
};
@@ -313,6 +261,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device
*pdev)
struct rcar_gen3_chan *channel;
struct phy_provider *provider;
struct resource *res;
+ int irq;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
@@ -323,29 +272,19 @@ static int rcar_gen3_phy_usb2_probe(struct
platform_device *pdev)
if (!channel)
return -ENOMEM;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2_host");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
channel->usb2.base = devm_ioremap_resource(dev, res);
if (IS_ERR(channel->usb2.base))
return PTR_ERR(channel->usb2.base);
- /* "hsusb" memory resource is optional */
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsusb");
-
- /* To avoid error message by devm_ioremap_resource() */
- if (res) {
- int irq;
-
- channel->hsusb.base = devm_ioremap_resource(dev, res);
- if (IS_ERR(channel->hsusb.base))
- channel->hsusb.base = NULL;
- /* call request_irq for OTG */
- irq = platform_get_irq(pdev, 0);
- if (irq >= 0)
- irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
- IRQF_SHARED, dev_name(dev),
- channel);
+ /* call request_irq for OTG */
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0) {
+ irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
+ IRQF_SHARED, dev_name(dev), channel);
if (irq < 0)
dev_err(dev, "No irq handler (%d)\n", irq);
+ channel->has_otg = true;
}
/* devm_phy_create() will call pm_runtime_enable(dev); */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
