This patch is porting Raydium I2C touch driver. Developer can enable raydium
touch driver by modifying define
"CONFIG_TOUCHSCREEN_RM_TS".
Signed-off-by: jeffrey.lin <jeffrey....@rad-ic.com>
---
drivers/input/touchscreen/Kconfig | 12 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/rm31100_ts.c | 747 +++++++++++++++++++++++++++++++++
3 files changed, 760 insertions(+)
create mode 100644 drivers/input/touchscreen/rm31100_ts.c
diff --git a/drivers/input/touchscreen/Kconfig
b/drivers/input/touchscreen/Kconfig
index c0659eb..ea7e259 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -974,4 +974,16 @@ config TOUCHSCREEN_ZFORCE
To compile this driver as a module, choose M here: the
module will be called zforce_ts.
+config TOUCHSCREEN_RM_TS
+ tristate "Raydium I2C Touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have Raydium series I2C touchscreen,
+ such as RM31100 , connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rm31100_ts.
+
endif
diff --git a/drivers/input/touchscreen/Makefile
b/drivers/input/touchscreen/Makefile
index 944e5b3..1a11974 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -80,3 +80,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) +=
zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
+obj-$(CONFIG_TOUCHSCREEN_RM_TS) += rm31100_ts.o
diff --git a/drivers/input/touchscreen/rm31100_ts.c
b/drivers/input/touchscreen/rm31100_ts.c
new file mode 100644
index 0000000..b1b8087
--- /dev/null
+++ b/drivers/input/touchscreen/rm31100_ts.c
@@ -0,0 +1,747 @@
+/*
+ * Raydium RM31100_ts touchscreen driver.
+ *
+ * Copyright (C) 2012-2014, Raydium Semiconductor Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Raydium reserves the right to make changes without further notice
+ * to the materials described herein. Raydium does not assume any
+ * liability arising out of the application described herein.
+ *
+ * Contact Raydium Semiconductor Corporation at www.rad-ic.com
+ *
+ */
+#include <linux/async.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+#include <linux/input/mt.h>
+#include <linux/regulator/consumer.h>
+
+#define rm31100 0x0
+#define rm3110x 0x1
+
+#define INVALID_DATA 0xff
+#define MAX_REPORT_TOUCHED_POINTS 10
+
+#define I2C_CLIENT_ADDR 0x39
+#define I2C_DMA_CLIENT_ADDR 0x5A
+
+struct rm31100_ts_data {
+ u8 x_index;
+ u8 y_index;
+ u8 z_index;
+ u8 id_index;
+ u8 touch_index;
+ u8 data_reg;
+ u8 status_reg;
+ u8 data_size;
+ u8 touch_bytes;
+ u8 update_data;
+ u8 touch_meta_data;
+ u8 finger_size;
+};
+
+struct rm3110x_ts_platform_data {
+ u32 dis_min_x; /* display resoltion ABS min*/
+ u32 dis_max_x;/* display resoltion ABS max*/
+ u32 dis_min_y;
+ u32 dis_max_y;
+ u32 res_x; /* TS resolution unit*/
+ u32 res_y;
+ u32 swap_xy;
+ u8 nfingers;
+ bool wakeup;
+};
+
+static struct rm31100_ts_data devices[] = {
+ [0] = {
+ .x_index = 2,
+ .y_index = 4,
+ .z_index = 6,
+ .id_index = 1,
+ .data_reg = 0x1,
+ .status_reg = 0,
+ .update_data = 0x0,
+ .touch_bytes = 6,
+ .touch_meta_data = 1,
+ .finger_size = 70,
+ },
+ [1] = {
+ .x_index = 2,
+ .y_index = 4,
+ .z_index = 6,
+ .id_index = 1,
+ .data_reg = 0x0,
+ .status_reg = 0,
+ .update_data = 0x0,
+ .touch_bytes = 6,
+ .touch_meta_data = 1,
+ .finger_size = 70,
+ },
+};
+
+struct rm31100_ts {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct regulator *dvdd;
+ struct regulator *avdd;
+ struct gpio_desc *resout_gpio;
+ struct rm3110x_ts_platform_data *pdata;
+ struct rm31100_ts_data *dd;
+ u8 *touch_data;
+ u8 device_id;
+ bool is_suspended;
+ struct mutex access_lock;
+ u32 pen_irq;
+ u8 fw_version;
+ u8 u8_sub_version;
+};
+
+static int rm31100_ts_write_reg_u8(struct i2c_client *client, u8 reg, u8 val)
+{
+ int data;
+
+ data = i2c_smbus_write_byte_data(client, reg, val);
+ if (data < 0)
+ dev_err(&client->dev, "error %d in writing reg 0x%x\n",
+ data, reg);
+
+ return data;
+}
+
+static int rm31100_ts_read_reg_u8(struct i2c_client *client, u8 reg)
+{
+ int data;
+
+ data = i2c_smbus_read_byte_data(client, reg);
+ if (data < 0)
+ dev_err(&client->dev, "error %d in reading reg 0x%x\n",
+ data, reg);
+
+ return data;
+}
+
+static int rm31100_ts_read(struct i2c_client *client, u8 reg, u8 *buf, int num)
+{
+ struct i2c_msg xfer_msg[2];
+
+ xfer_msg[0].addr = client->addr;
+ xfer_msg[0].len = 1;
+ xfer_msg[0].flags = 0;
+ xfer_msg[0].buf = ®
+
+ xfer_msg[1].addr = client->addr;
+ xfer_msg[1].len = num;
+ xfer_msg[1].flags = I2C_M_RD;
+ xfer_msg[1].buf = buf;
+
+ return i2c_transfer(client->adapter, xfer_msg, num);
+}
+
+static int rm31100_ts_write(struct i2c_client *client, u8 *buf, int num)
+{
+ struct i2c_msg xfer_msg[1];
+
+ xfer_msg[0].addr = client->addr;
+ xfer_msg[0].len = num;
+ xfer_msg[0].flags = 0;
+ xfer_msg[0].buf = buf;
+
+ return i2c_transfer(client->adapter, xfer_msg, num);
+}
+
+static ssize_t rm_fw_version_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rm31100_ts *info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "Release Version %d.%0d\n",
+ info->fw_version,
+ info->u8_sub_version);
+}
+
+static DEVICE_ATTR(fw_version, S_IRUGO, rm_fw_version_show, NULL);
+
+static struct attribute *rm_ts_attributes[] = {
+ &dev_attr_fw_version.attr,
+ NULL
+};
+
+static const struct attribute_group rm_ts_attr_group = {
+ .attrs = rm_ts_attributes,
+};
+
+static void report_data(struct rm31100_ts *dev, u16 x, u16 y,
+ u8 pressure, u8 id)
+{
+ struct input_dev *input_dev = dev->input;
+
+ if (dev->pdata->swap_xy)
+ swap(x, y);
+
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, true);
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+ input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+ input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, dev->dd->finger_size);
+}
+
+static void process_rm31100_data(struct rm31100_ts *ts)
+{
+ u8 id, pressure, touches, i;
+ u16 x, y;
+
+ touches = ts->touch_data[ts->dd->touch_index];
+
+ if (touches > 0) {
+ for (i = 0; i < touches; i++) {
+ id = ts->touch_data[i * ts->dd->touch_bytes +
+ ts->dd->id_index];
+ pressure = ts->touch_data[i * ts->dd->touch_bytes +
+ ts->dd->z_index];
+ x = get_unaligned_le16(&(ts->touch_data[i *
+ ts->dd->touch_bytes + ts->dd->x_index]));
+ y = get_unaligned_le16(&(ts->touch_data[i *
+ ts->dd->touch_bytes + ts->dd->y_index]));
+ report_data(ts, x, y, pressure, id);
+ }
+ } else
+ input_mt_sync(ts->input);
+
+ input_mt_report_pointer_emulation(ts->input, true);
+ input_sync(ts->input);
+}
+
+static int rm31100_ts_xy_worker(struct rm31100_ts *work)
+{
+ int rc;
+ struct rm31100_ts *ts = work;
+
+ /* read data from DATA_REG */
+ rc = rm31100_ts_read(ts->client, ts->dd->data_reg, ts->touch_data,
+ ts->dd->data_size);
+
+ if (rc < 0) {
+ dev_err(&ts->client->dev, "read failed\n");
+ goto schedule;
+ }
+
+ if (ts->touch_data[ts->dd->touch_index] == INVALID_DATA)
+ goto schedule;
+
+ /* write to STATUS_REG to release lock */
+ rc = rm31100_ts_write_reg_u8(ts->client,
+ ts->dd->status_reg, ts->dd->update_data);
+ if (rc < 0) {
+ dev_err(&ts->client->dev, "write failed, try once more\n");
+
+ rc = rm31100_ts_write_reg_u8(ts->client,
+ ts->dd->status_reg, ts->dd->update_data);
+ if (rc < 0)
+ dev_err(&ts->client->dev, "write failed, exiting\n");
+ }
+
+ process_rm31100_data(ts);
+schedule:
+ return rc;
+}
+
+static irqreturn_t rm31100_ts_irq(int irq, void *dev_id)
+{
+ struct rm31100_ts *ts = dev_id;
+ struct device *dev = &ts->client->dev;
+ int rc;
+
+ rc = rm31100_ts_xy_worker(ts);
+ if (rc < 0) {
+ dev_err(dev, "Handling message fails in IRQ, %d.\n",
+ rc);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int rm_ts_power_on(struct rm31100_ts *ts)
+{
+ int error;
+
+ /*
+ * If we do not have reset gpio assume platform firmware
+ * controls regulators and does power them on for us.
+ */
+ if (IS_ERR_OR_NULL(ts->resout_gpio))
+ return 0;
+
+ gpiod_set_value_cansleep(ts->resout_gpio, 1);
+
+ error = regulator_enable(ts->avdd);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "failed to enable avdd regulator: %d\n",
+ error);
+ goto release_reset_gpio;
+ }
+
+ error = regulator_enable(ts->dvdd);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "failed to enable dvdd regulator: %d\n",
+ error);
+ regulator_disable(ts->dvdd);
+ goto release_reset_gpio;
+ }
+
+release_reset_gpio:
+ gpiod_set_value_cansleep(ts->resout_gpio, 0);
+ if (error)
+ return error;
+
+ msleep(20);
+
+ return 0;
+}
+
+static void rm_ts_power_off(void *_data)
+{
+ struct rm31100_ts *data = _data;
+
+ if (!IS_ERR_OR_NULL(data->resout_gpio)) {
+ /*
+ * Activate reset gpio to prevent leakage through the
+ * pin once we shut off power to the controller.
+ */
+ gpiod_set_value_cansleep(data->resout_gpio, 1);
+ regulator_disable(data->avdd);
+ regulator_disable(data->dvdd);
+ }
+}
+
+static int rm31100_ts_init_ts(struct i2c_client *client, struct rm31100_ts *ts)
+{
+ /*struct input_dev *input_device;*/
+ /*int rc = 0;*/
+
+ ts->dd = &devices[ts->device_id];
+
+ if (!ts->pdata->nfingers) {
+ dev_err(&client->dev, "Touches information not specified\n");
+ return -EINVAL;
+ }
+
+ if (ts->device_id == rm3110x) {
+ if (ts->pdata->nfingers > 2) {
+ dev_err(&client->dev, "Touches >=1 & <= 2\n");
+ return -EINVAL;
+ }
+ ts->dd->data_size = ts->dd->touch_bytes;
+ ts->dd->touch_index = 0x0;
+ } else if (ts->device_id == rm31100) {
+ if (ts->pdata->nfingers > 10) {
+ dev_err(&client->dev, "Touches >=1 & <= 10\n");
+ return -EINVAL;
+ }
+ ts->dd->data_size = ts->pdata->nfingers * ts->dd->touch_bytes +
+ ts->dd->touch_meta_data;
+ ts->dd->touch_index = 0x0;
+ }
+ /* w001 */
+ else {
+ ts->dd->data_size = ts->pdata->nfingers * ts->dd->touch_bytes +
+ ts->dd->touch_meta_data;
+ ts->dd->touch_index = 0x0;
+ }
+
+ ts->touch_data = kzalloc(ts->dd->data_size, GFP_KERNEL);
+ if (!ts->touch_data)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void __maybe_unused rm_enter_sleep(struct rm31100_ts *data)
+{
+ const u8 sleep_cmd[] = { 0x5A, 0xff, 0x00, 0x0f };
+ int rc;
+
+ rc = rm31100_ts_write(data->client, (u8 *)sleep_cmd,
+ ARRAY_SIZE(sleep_cmd));
+ if (rc)
+ dev_err(&data->client->dev,
+ "Send sleep failed: %d\n", rc);
+}
+
+static int __maybe_unused rm31100_ts_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rm31100_ts *ts = i2c_get_clientdata(client);
+
+ disable_irq(ts->pen_irq);
+
+ if (device_may_wakeup(dev)) {
+ rm_enter_sleep(ts);
+ /* mark suspend flag */
+ ts->is_suspended = (enable_irq_wake(ts->pen_irq) == 0);
+ } else
+ rm_ts_power_off(ts);
+
+ return 0;
+}
+
+static int __maybe_unused rm31100_ts_resume(struct device *dev)
+{
+ struct rm31100_ts *ts = dev_get_drvdata(dev);
+
+ int rc = 0;
+
+ if (device_may_wakeup(dev)) {
+ disable_irq_wake(ts->pen_irq);
+
+ ts->is_suspended = false;
+ } else {
+ rc = rm_ts_power_on(ts);
+ if (rc) {
+ dev_err(dev, "unable to resume\n");
+ return rc;
+ }
+
+ enable_irq(ts->pen_irq);
+
+ /* Clear the status register of the TS controller */
+ rc = rm31100_ts_write_reg_u8(ts->client,
+ ts->dd->status_reg, ts->dd->update_data);
+ if (rc < 0) {
+ dev_err(&ts->client->dev,
+ "write failed, try once more\n");
+
+ rc = rm31100_ts_write_reg_u8(ts->client,
+ ts->dd->status_reg,
+ ts->dd->update_data);
+ if (rc < 0)
+ dev_err(&ts->client->dev,
+ "write failed, exiting\n");
+ }
+ }
+
+ return 0;
+}
+
+static void rm_ts_remove_sysfs_group(void *_data)
+{
+ struct rm31100_ts *ts = _data;
+
+ sysfs_remove_group(&ts->client->dev.kobj, &rm_ts_attr_group);
+}
+
+static SIMPLE_DEV_PM_OPS(rm31100_ts_pm_ops,
+ rm31100_ts_suspend, rm31100_ts_resume);
+
+static int rm_input_dev_create(struct rm31100_ts *ts)
+{
+ struct input_dev *input_device;
+ int rc = 0;
+
+ input_device = input_allocate_device();
+ if (!input_device) {
+ rc = -ENOMEM;
+ goto error_alloc_dev;
+ }
+ ts->input = input_device;
+
+ input_device->name = "raydium_ts";
+ input_device->id.bustype = BUS_I2C;
+ input_device->dev.parent = &ts->client->dev;
+ input_set_drvdata(input_device, ts);
+
+ __set_bit(BTN_TOUCH, input_device->keybit);
+ __set_bit(EV_ABS, input_device->evbit);
+ __set_bit(EV_KEY, input_device->evbit);
+
+ /* For single touch */
+ input_set_abs_params(input_device, ABS_X,
+ ts->pdata->dis_min_x, ts->pdata->dis_max_x, 0, 0);
+ input_set_abs_params(input_device, ABS_Y,
+ ts->pdata->dis_min_x, ts->pdata->dis_max_y, 0, 0);
+ input_set_abs_params(input_device, ABS_PRESSURE,
+ 0, 255, 0, 0);
+ input_abs_set_res(input_device, ABS_X, ts->pdata->res_x);
+ input_abs_set_res(input_device, ABS_Y, ts->pdata->res_y);
+
+ /* Multitouch input params setup */
+ rc = input_mt_init_slots(input_device,
+ MAX_REPORT_TOUCHED_POINTS,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (rc)
+ goto error_unreg_device;
+
+ input_set_abs_params(input_device, ABS_MT_POSITION_X,
+ ts->pdata->dis_min_x, ts->pdata->dis_max_x, 0, 0);
+ input_set_abs_params(input_device, ABS_MT_POSITION_Y,
+ ts->pdata->dis_min_y, ts->pdata->dis_max_y, 0, 0);
+ input_set_abs_params(input_device, ABS_MT_PRESSURE,
+ 0, 0xFF, 0, 0);
+ input_set_abs_params(input_device, ABS_MT_TOUCH_MAJOR,
+ 0, 0xFF, 0, 0);
+ input_abs_set_res(input_device, ABS_MT_POSITION_X, ts->pdata->res_x);
+ input_abs_set_res(input_device, ABS_MT_POSITION_Y, ts->pdata->res_y);
+
+ rc = input_register_device(input_device);
+ if (rc)
+ goto error_unreg_device;
+
+ return 0;
+
+error_unreg_device:
+ input_free_device(input_device);
+error_alloc_dev:
+ ts->input = NULL;
+ return rc;
+}
+
+static int rm31100_initialize(struct i2c_client *client)
+{
+ struct rm31100_ts *ts = i2c_get_clientdata(client);
+ int rc = 0, temp_reg;
+
+ /* read one byte to make sure i2c device exists */
+ if (ts->device_id == rm3110x)
+ temp_reg = 0x01;
+ else if (ts->device_id == rm31100)
+ temp_reg = 0x00;
+ else
+ temp_reg = 0x05;
+
+ rc = rm31100_ts_read_reg_u8(client, temp_reg);
+ if (rc < 0) {
+ dev_err(&client->dev, "i2c sanity check failed\n");
+ return rc;
+ }
+
+ rc = rm31100_ts_init_ts(client, ts);
+ if (rc < 0) {
+ dev_err(&client->dev, "rm31100_ts init failed\n");
+ return rc;
+ }
+
+ return 0;
+}
+
+static int rm31100_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct rm31100_ts *ts;
+ struct rm3110x_ts_platform_data *pdata = client->dev.platform_data;
+ int rc;
+ union i2c_smbus_data dummy;
+
+ ts = devm_kzalloc(&client->dev, sizeof(struct rm31100_ts), GFP_KERNEL);
+
+ if (!ts)
+ return -ENOMEM;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+ dev_err(&client->dev, "I2C functionality not supported\n");
+ rc = -EIO;
+ goto error_touch_data_alloc;
+ }
+
+ ts->client = client;
+ ts->pdata = pdata;
+ i2c_set_clientdata(client, ts);
+ ts->device_id = id->driver_data;
+
+ ts->is_suspended = false;
+
+ mutex_init(&ts->access_lock);
+
+ ts->avdd = devm_regulator_get(&client->dev, "avdd");
+ if (IS_ERR(ts->avdd)) {
+ rc = PTR_ERR(ts->avdd);
+ if (rc != -EPROBE_DEFER)
+ dev_err(&client->dev,
+ "Failed to get 'avdd' regulator: %d\n",
+ rc);
+ return rc;
+ }
+
+ ts->dvdd = devm_regulator_get(&client->dev, "dvdd");
+ if (IS_ERR(ts->dvdd)) {
+ rc = PTR_ERR(ts->dvdd);
+ if (rc != -EPROBE_DEFER)
+ dev_err(&client->dev,
+ "Failed to get 'dvdd' regulator: %d\n",
+ rc);
+ return rc;
+ }
+
+ ts->resout_gpio = devm_gpiod_get_optional(&client->dev,
+ "ts_reset", 0);
+
+ if (IS_ERR(ts->resout_gpio)) {
+ rc = PTR_ERR(ts->resout_gpio);
+ /*
+ * On Chromebooks vendors like to source touch panels from
+ * different vendors, but they are connected to the same
+ * regulators/GPIO pin. The drivers also use asynchronous
+ * probing, which means that more than one driver will
+ * attempt to claim the reset line. If we find it busy,
+ * let's try again later.
+ */
+ if (rc == -EBUSY) {
+ dev_info(&client->dev,
+ "reset gpio is busy, deferring probe\n");
+ return -EPROBE_DEFER;
+ }
+
+ if (rc == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ if (rc != -ENOENT && rc != -ENOSYS) {
+ dev_err(&client->dev,
+ "failed to get reset gpio: %d\n",
+ rc);
+ return rc;
+ }
+ }
+
+ rc = rm_ts_power_on(ts);
+ if (rc)
+ return rc;
+
+ rc = devm_add_action(&client->dev, rm_ts_power_off, ts);
+ if (rc) {
+ dev_err(&client->dev,
+ "failed to install power off action: %d\n", rc);
+ rm_ts_power_off(ts);
+ return rc;
+ }
+
+ /* Make sure there is something at this address */
+ if (i2c_smbus_xfer(client->adapter, client->addr, 0,
+ I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0)
+ return -ENODEV;
+
+ rc = rm31100_initialize(client);
+ if (rc < 0) {
+ dev_err(&client->dev, "probe failed! unbind device.\n");
+ return rc;
+ }
+
+ rc = rm_input_dev_create(ts);
+ if (rc) {
+ dev_err(&client->dev, "%s crated failed, %d\n", __func__, rc);
+ return rc;
+ }
+
+ rc = devm_request_threaded_irq(&client->dev, ts->pen_irq,
+ NULL, rm31100_ts_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ client->name, ts);
+ if (rc) {
+ dev_err(&client->dev, "Failed to register interrupt\n");
+ return rc;
+ }
+
+ rc = sysfs_create_group(&client->dev.kobj, &rm_ts_attr_group);
+ if (rc) {
+ dev_err(&client->dev, "failed to create sysfs attributes: %d\n",
+ rc);
+ return rc;
+ }
+
+ rc = devm_add_action(&client->dev,
+ rm_ts_remove_sysfs_group, ts);
+ if (rc) {
+ rm_ts_remove_sysfs_group(ts);
+ dev_err(&client->dev,
+ "Failed to add sysfs cleanup action: %d\n",
+ rc);
+ return rc;
+ }
+ return 0;
+
+error_touch_data_alloc:
+ return rc;
+}
+
+static int rm31100_ts_remove(struct i2c_client *client)
+{
+ struct rm31100_ts *ts = i2c_get_clientdata(client);
+
+ device_init_wakeup(&client->dev, 0);
+
+ devm_free_irq(&client->dev, ts->pen_irq, ts);
+
+ input_unregister_device(ts->input);
+
+ mutex_destroy(&ts->access_lock);
+
+ rm_ts_power_off(ts);
+
+ kfree(ts->touch_data);
+ kfree(ts);
+
+ return 0;
+}
+
+static const struct i2c_device_id rm31100_ts_id[] = {
+ {"RM31100", 0},
+ {"RM3110x", 1},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, rm31100_ts_id);
+
+
+static struct i2c_driver rm31100_ts_driver = {
+ .probe = rm31100_ts_probe,
+ .remove = rm31100_ts_remove,
+ .id_table = rm31100_ts_id,
+ .driver = {
+ .name = "raydium_ts",
+ },
+};
+
+static int __init rm31100_ts_init(void)
+{
+ int rc;
+
+ rc = i2c_add_driver(&rm31100_ts_driver);
+
+ return rc;
+}
+/* Making this as late init to avoid power fluctuations
+ * during LCD initialization.
+ */
+module_init(rm31100_ts_init);
+
+static void __exit rm31100_ts_exit(void)
+{
+ i2c_del_driver(&rm31100_ts_driver);
+}
+module_exit(rm31100_ts_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("rm31100-rm3110x touchscreen controller driver");
+MODULE_AUTHOR("Raydium");
+MODULE_ALIAS("platform:rm31100_ts");
--
2.1.2
