On Wed, Dec 20, 2006 at 04:33:10PM +0300, Andrey Panin wrote: > On 347, 12 13, 2006 at 02:45:46PM +0000, Russell King wrote: > > Linus, Andrew, > > > > This patch adds initial support to 8250-pci for the Korenix Jetcard PCI > > serial cards. The JC12xx cards are standard RS232-based serial cards > > utilising the Oxford 16C950 device. > > > > The JC14xx are RS422/RS485-based cards, but in order for these to be > > supported natively, we will need additional tweaks to the 8250 layers > > so we can specify some values for the 950's registers. Hence, these > > two entries are commented out. > > IIRC 16c950 just need two bits in ACR set properly. Will attached patch > do the trick ?
I, too, also have a patch which does something similar. I'm going to hold off on that until post 2.6.20 though, especially as I have no way to test it. -- Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
