On Tue, Jan 26, 2016 at 12:21 PM, Cristina Moraru
<[email protected]> wrote:
> This patch adds support for Hoperf th02 humidity and
> temperature sensor as it uses same register definitions
> as si7005
>
> th02 Datasheet:
> http://www.anglia-live.com/netalogue/pdfs/hrf/datasheets/TH02_V1.1.pdf
>
> Signed-off-by: Cristina Moraru <[email protected]>
> ---
> drivers/iio/humidity/Kconfig | 3 ++-
> drivers/iio/humidity/si7005.c | 1 +
> 2 files changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
> index c1f3a21..866dda1 100644
> --- a/drivers/iio/humidity/Kconfig
> +++ b/drivers/iio/humidity/Kconfig
> @@ -43,7 +43,8 @@ config SI7005
> humidity and temperature sensor.
>
> To compile this driver as a module, choose M here: the module
> - will be called si7005.
> + will be called si7005. This driver also
> + supports Hoperf TH02 Humidity and Temperature Sensor.
This probably shouldn't be changing the Kconfig description. Since if
every driver added a line for each device/variant it supported
everything would get quite wordy.
>
> config SI7020
> tristate "Si7013/20/21 Relative Humidity and Temperature Sensors"
> diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c
> index 91972cc..98a022f 100644
> --- a/drivers/iio/humidity/si7005.c
> +++ b/drivers/iio/humidity/si7005.c
> @@ -170,6 +170,7 @@ static int si7005_probe(struct i2c_client *client,
>
> static const struct i2c_device_id si7005_id[] = {
> { "si7005", 0 },
> + { "th02", 0 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, si7005_id);
> --
> 1.9.1
>
