On 26/01/16 20:17, Cristina Moraru wrote: > This patch adds support for Hoperf th06 humidity and > temperature sensor as it uses same register definitions > as si7020 > > th06 Datasheet: http://www.hoperf.com/upload/sensor/TH06.pdf > > Signed-off-by: Cristina Moraru <[email protected]> Applied - thanks,
Jonathan > --- > Previously sent: http://marc.info/?l=linux-iio&m=145255305514311&w=2 > > drivers/iio/humidity/Kconfig | 3 ++- > drivers/iio/humidity/si7020.c | 1 + > 2 files changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig > index 6a23698..c1f3a21 100644 > --- a/drivers/iio/humidity/Kconfig > +++ b/drivers/iio/humidity/Kconfig > @@ -50,7 +50,8 @@ config SI7020 > depends on I2C > help > Say yes here to build support for the Silicon Labs Si7013/20/21 > - Relative Humidity and Temperature Sensors. > + Relative Humidity and Temperature Sensors. This driver also > + supports Hoperf TH06 Humidity and Temperature Sensor. > > To compile this driver as a module, choose M here: the module > will be called si7020. > diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c > index 71991b5..5ab4e06 100644 > --- a/drivers/iio/humidity/si7020.c > +++ b/drivers/iio/humidity/si7020.c > @@ -149,6 +149,7 @@ static int si7020_probe(struct i2c_client *client, > > static const struct i2c_device_id si7020_id[] = { > { "si7020", 0 }, > + { "th06", 0 }, > { } > }; > MODULE_DEVICE_TABLE(i2c, si7020_id); >
