> Lubomir Rintel <lkund...@v3.sk> writes:
>
> > diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> > b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> > index ef54050..32bbd2a 100644
> > --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> > +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
>
> Hi,
>
> Shouldn't this be common to all RPi1 B and RPi2 models, instead of being
> specific to just RPi B+?
>
> > +&usb {
> > + usb1@01 {
> > + compatible = "usb1d6b,0002";
> > + reg = <01>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ethernet: usbether@01 {
> > + compatible = "usb0424,9514";
> > + reg = <01>;
> > + };
> > + };
> > +};
>
> For reference, on RPi2:
Using "lsusb -t" you may get bus topology.
> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514
> Fast Ethernet Adapter
It is the ethernet device, you may need to change vid/pid in dts.
> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
It is the hub device, you may need to change vid/pid in dts.
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
It is root hub, it doesn't need to be described at dts.
Best regards,
Peter
