On Fri, Feb 5, 2016 at 12:06 PM, John Stultz <john.stu...@linaro.org> wrote: > This patch adds a dts file to support the Nexus7 2013 > device. Its based off of the qcom-apq8064-ifc6410.dts > which is similar hardware. > > Also includes some comments and context folded in > from Vinay Simha BN <simha...@gmail.com> > > Cc: Rob Herring <robh...@kernel.org> > Cc: Arnd Bergmann <arnd.bergm...@linaro.org> > Cc: Pawel Moll <pawel.m...@arm.com> > Cc: Mark Rutland <mark.rutl...@arm.com> > Cc: Ian Campbell <ijc+devicet...@hellion.org.uk> > Cc: Kumar Gala <ga...@codeaurora.org> > Cc: Andy Gross <agr...@codeaurora.org> > Cc: Russell King <li...@arm.linux.org.uk> > Cc: Vinay Simha BN <simha...@gmail.com> > Cc: Bjorn Andersson <bjorn.anders...@linaro.org> > Cc: Stephen Boyd <stephen.b...@linaro.org> > Cc: linux-arm-...@vger.kernel.org > Cc: devicet...@vger.kernel.org > Signed-off-by: John Stultz <john.stu...@linaro.org> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 276 > +++++++++++++++++++++ > 2 files changed, 277 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index a4a6d70..5b16715 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > qcom-apq8064-cm-qs600.dtb \ > qcom-apq8064-ifc6410.dtb \ > qcom-apq8064-sony-xperia-yuga.dtb \ > + qcom-apq8064-asus-nexus7-flo.dts \
s/dts/dtb/ You must not be doing "make dtbs". Otherwise, for both patches: Acked-by: Rob Herring <r...@kernel.org>
