It's perfectly valid to use the LTC3589 without an interrupt pin
connected to it. Currently, the driver probing fails when client->irq
is 0 (which means "no interrupt"). Don't register the interrupt
handler in that case but successfully finish the device probing instead.
Signed-off-by: Bernhard Walle <bernh...@bwalle.de>
---
drivers/regulator/ltc3589.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c
index 972c386..f2149d07 100644
--- a/drivers/regulator/ltc3589.c
+++ b/drivers/regulator/ltc3589.c
@@ -520,12 +520,14 @@ static int ltc3589_probe(struct i2c_client *client,
}
}
- ret = devm_request_threaded_irq(dev, client->irq, NULL, ltc3589_isr,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- client->name, ltc3589);
- if (ret) {
- dev_err(dev, "Failed to request IRQ: %d\n", ret);
- return ret;
+ if (client->irq != 0) {
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
ltc3589_isr,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ client->name, ltc3589);
+ if (ret) {
+ dev_err(dev, "Failed to request IRQ %d: %d\n",
client->irq, ret);
+ return ret;
+ }
}
return 0;
--
2.7.1
